Справочник Пользователя для Mitel 3000 5330

Mitel 5330/5340 IP Phones – User Guide 

The following combinations of corded and cordless headset and handset are supported on the 
5330/5340 IP Phone: 

•  Corded handset only 
•  Corded headset only 
•  Corded handset and corded headset 
•  Cordless handset only 
•  Cordless headset only 
•  Cordless handset and cordless headset 
•  Corded handset and cordless headset 
•  Corded headset and cordless handset 

The cordless headset and handset are optional accessories, ordered separately. Before use, 
each must establish communication with the Cordless Module using a procedure called pairing.  

•  An IP telephone can have only one cordless handset and one cordless headset. 

•  A cordless handset or headset can be paired with only one IP telephone at a time. 

•  Pairing a new cordless handset or headset with the IP telephone overwrites the 

configuration of any previous handset or headset. 

•  Pairing cannot be performed when the cordless device is already in use. 

To pair a cordless accessory: 

1.  Ensure that the battery of the cordless device to be paired is at least partially charged. 

2.  Press and hold down the pairing button on the back of the Cordless Module (see Figure 2 

on page 37) for 5 seconds to activate telephone pairing mode. The LED on the Cordless 
Module blinks. The Cordless Devices application opens on the telephone and prompts 
you to “Press the pairing button on the cordless device now.  

3.  Press and hold down the hookswitch on the cordless handset or headset for 5 seconds to 

activate accessory pairing mode. Note: on the headset, the hookswitch is the grey 
portion on which the logo is displayed. 

4.  If the device has not been previously paired: 

−  The LED on the cordless accessory blinks. After a moment, the Cordless Devices 

application displays protocol, firmware, hardware, and IPEI information for the device 
to be paired. 

− Press 

Yes to confirm pairing. During the pairing process, a blue LED on the device 

flashes. The Cordless Devices application confirms the pairing by displaying the 
paired device name and its battery level indicator. 

5.  If the device has been previously paired:  

− Press 

Yes at the prompt, “Do you want to pair this device?”. During the pairing 

process, a blue LED on the device flashes. The Cordless Devices application 
confirms the pairing by displaying the paired device name and its battery level