Справочник Пользователя для Cadillac escalade ext 2002

Suppose you set your cruise control at a desired speed
and then you apply the brake. This, of course,
disengages the cruise control. But you don’t need to
reset it.

Once you’re going about 25 mph (40 km/h) or more,
you can move the cruise control switch from ON to 
R/A (Resume/Accelerate) briefly.

You’ll go right back up to your chosen speed and 
stay there.

If you hold the switch at R/A, the vehicle will keep
going faster until you release the switch or apply the
brake. So unless you want to go faster, don’t hold the
switch at R/A.

There are two ways to go to a higher speed:
D Use the accelerator pedal to get to the higher speed.

Press the SET button at the end of the lever, then
release the button and the accelerator pedal. 
You’ll now cruise at the higher speed.

D Move the cruise switch from ON to R/A. Hold it

there until you get up to the speed you want, and
then release the switch. To increase your speed in
very small amounts, move the switch to R/A briefly.
Each time you do this, your vehicle will go about
1 mph (1.6 km/h) faster.