Справочник Пользователя для Cadillac escalade ext 2002

If an error occurs while trying to play a cassette tape, 
it could be for one of the following reasons:
D The cassette tape is tight and the cassette player

cannot turn the hubs of the tape. Hold the cassette
tape with the open end down and try turning the 
right hub counterclockwise with a pencil. Flip the
tape over and repeat. If the hubs do not turn easily,
your cassette tape may be damaged and should not
be used in the player. Try a new tape to be sure your
player is working properly.

D The cassette tape is broken. (Check to see if your

tape is broken. Try a new tape.)

CLN (Clean): If this message appears on the display,
the cassette tape player needs to be cleaned. It will still
play tapes, but you should clean it as soon as possible to
prevent damage to the tapes and player. See “Care of
Your Cassette Tape Player” in the Index.

If any error occurs repeatedly or if an error can’t be
corrected, contact your dealer.

It is possible to use a portable CD player adapter kit
with your cassette tape player after activating the bypass
feature on your tape player.

To activate the bypass feature, perform the following steps:

1. Turn the ignition to RUN or ACCESSORY.

2. Turn the radio off.

3. Press and hold the TAPE button for five seconds.

The tape symbol on the display will flash for two
seconds, indicating the feature is active.

4. Insert the adapter into the cassette slot. It will 

power up the radio and begin playing.

This override routine will remain active until EJECT 
is pressed.