Справочник Пользователя для Mitsubishi m720
21-
Tools
TRANSFERRING
A
NAME
CARD
VIA
THE
INFRARED
PORT
You can transfer a name card via the infrared port:
USING
YOUR
MOBILE
AS
A
MODEM
You can use your mobile as a modem for other devices (PC, PDA,...) via the infrared port (on
both devices) or via a PC cable. To launch a connection you previously need to have a standard
modem driver installed on the other appliance:
Your mobile:
or:
Once both devices are ready the Internet connection can be launched (without any action being
performed on your mobile).
3
1. The infrared port automatically closes if it remains unused for a while.
2. If the file received via infrared port has no name or if its name already exists in the mobile, the mobile gene-
rates a new name for the file.
1
Place your mobile opposite the other device infrared port.
2
Open the other device infrared port.
3
Select the card you wish to transfer as explained in section "viewing and calling phonebook
numbers", page 45.
4
Select
Options
. Select
Send by... Infrared port
.
The infrared port is opened and the transfer is then performed.
1
Install the PC cable or open the Infrared port on your PC or PDA.
2
Install the modem driver.
3
Configure the PC according to the instructions given with the modem driver.
Please enter the following parameters:
- Flow control: Hardware
- Data Bits: 8
- Parity: No parity
- Stop Bit: 1 stop Bit
- Speed: 115200b/s
The PC cable may not be supplied with your mobile. Please ask your retailer for a M720 compatible PC cables.
1
Plug in the PC cable (please see Table , page 4).
1
Open your mobile Infrared port.
If your mobile is set to Modem mode (Please see "security features", page 76) all incoming calls are rejected.
If your mobile is not set to Modem mode your Internet connection may be interrupted by incoming calls.