Справочник Пользователя для Mitsubishi ah129

22

The location number, the alphabet name (if used), and the
telephone number stored at that location will be displayed.

“RCL” and “11” will recall the number stored in location 11.
In this example, location 11 has an alphabet name (DAVID):

Note:

By pressing the “SEND” key the recalled number
can be dialed.

If the telephone number contains more than seven
(7) digits, only the lower seven (7) digits remain on
the display.

It is possible to add digits to recalled numbers.

In order to delete the stored memory, the operation is as
follows:

1.

Hold down the “CLR” key to clear any entered digits.  (If
no digit is displayed, this action is not required.)

       

     -ON-

2.

Press the “STO” (STORE) key. The following message is
shown:

3.

Enter a two (2) digit memory location (01 to 39). The
current telephone number (if it exists) is displayed for
two (2) seconds.  The “overwrite warning tone” will be
heard, and the confirmation message will be displayed.
(If entered memory location is vacant, the display will
show the “01: Empty” message.)