Справочник Пользователя для Olympus 710-710

62

G

ettin

g to kno

w

 you

r 

ca

mera 

be

tter

5

The flash fires automatically when there is insufficient light. If the subject is too 
far away, the flash may have no effect. Here is how to take pictures without the 
flash in this type of situation.
Set the camera to 

h mode

• Because the sensitivity of the CCD increases automatically, you can hold the 

camera and take pictures in darker places with the flash off.

g “h Shooting pictures using image blur reduction” (P. 9)

• Increase the value of the [ISO] setting. 

g “ISO Changing the ISO sensitivity” (P. 21)

There are several factors that can cause the picture to appear grainy.
Using the digital zoom to take close-up pictures

• With the digital zoom, part of the image is cropped and enlarged. The greater 

the magnification, the grainier the picture appears.

g “DIGITAL ZOOM Zooming in on your subject” (P. 22)

• When you increase the [ISO] setting, “noise”, which appears as spots of 

unwanted color or unevenness in the color, can be introduced and give the 
picture a grainy appearance. This camera is equipped with a function to allow 
shooting at high sensitivity while suppressing noise; however, increasing the 
ISO sensitivity creates grainier pictures than when using a lower sensitivity.

g “ISO Changing the ISO sensitivity” (P. 21)

• The reason why there are differences between the colors in a picture and the 

actual colors taken and the actual color is the light source illuminating the 
subject. [WB] is the function that allows the camera to determine the correct 
colors. Normally, the [AUTO] setting provides the optimal white balance, but 
depending on the subject, it may be better to experiment with changing the 
[WB] setting.

• When the subject is in the shade on a sunny day
• When the subject is illuminated by both natural light and indoor lighting, 

such as when near a window

• When there is no white in the center of the frame

g “WB Adjusting the color of a picture” (P. 21)