Справочник Пользователя для GE 28001

1.  Use the touch-tone pad to enter a name (up to 15 characters).

2. Press the 

MUTE/PROG button to save your name. You will hear a confirmation 

tone and the handset name shows in the display.

the handset near the base.
From the Handset Setup Menu:
1.  Press the 

CALLER ID-VOLUME ( 6 or 5) button to scroll to the DEREGISTRATION 

sub-menu.

2.  Press the 

MUTE/PROG button to enter the menu. DEREGISTRATION  1YES  

4

2NO - - - shows in the display The default setting is "2NO".

3.  Use the touch-tone pad to select 1 for YES or 2 for NO. Or use the 

VOLUME ( 6 or 5) button to scroll to 1YES or 2NO.

4.  Select NO, if you do not want to de-register.
5.  If you select 

1YES, press the MUTE/PROG button and MOVE NEAR TO BASE 

displays for 2 seconds, then 

CONFIRM? 1YES 2NO appears in the display.

6. Press the touch-tone pad to select 

1YES or 2NO, or use the CALLER ID-VOLUME 

(6 or 5) button to scroll to 

1YES or 2NO.

7.  If you select YES, press the 

MUTE/PROG button to confirm. You will hear a 

confirmation tone. Then 

HANDSET X DEREGISTERED shows in the display to 

confirm the handset is deregistered.

NEEDS REGISTRATION shows in the display. To use the handset,  

If one or more handsets becomes lost, you should de-register all handsets to 

ensure proper system operation. Follow the steps below to de-register all handsets 

at the same time.

1.  Press and hold the 

page button on the base until the CHARGE/IN USE indicator 

on the base flashes.

2.  Press and hold the 

page button on the base again until the CHARGE/IN USE 

indicator on the base flashes rapidly.

3.  Press and release the 

page button on the base once. All handsets are de-

registered and 

HANDSET NEEDS REGISTRATION shows in the display.

The intercom feature allows you to have a conversation with another registered 

handset without tying up the telephone line, allowing you to still receive incoming 

calls.

1.  Make sure the handset is 

OFF (not in talk mode).

2.  Press the 

INTERCOM button on the handset.

3.  Use the touch-tone pad to select the handset you want to page.

4.  Wait for the person at the receiving handset to press the 

INTERCOM button.

displays NO ANSWER.

5.  When finished, press the 

*EXIT button or INTERCOM button on either handset to 

deactivate the intercom.

When you receive an intercom call, your handset beeps. To answer the call press 

the 

INTERCOM button or TALK/CALL BACK button.

If you receive a telephone call during an intercom call, the intercom call is 

immediately terminated and both handsets ring. Either handset user may press the 

TALK/CALL BACK button to answer the call.

During a telephone call, you may use the intercom/paging function to page 

another handset and have an off line, private (two-way) intercom conversation. 

You may also have a three-way conversation between the external caller and the 

handsets, or you may transfer the external telephone call to another handset.

1.  During an external call, press the 

INTERCOM button, and use the touch-tone 

pad to enter the handset number you want to call.

2.  When finished, press the 

*EXIT button or INTERCOM button to end the intercom 

call, return to the talk mode, and resume your original telephone conversation.

1.  During an external call, press the 

INTERCOM button. LINE ON HOLD 

EXTENSION? shows in the display.

2.  Use the touch-tone pad to select Handset #. You will hear a paging tone and 

PAGING shows in the originating handset’s display.

NOTE: PAGING FROM... shows in the display on the receiving 

3.  When the receiving handset connects, press the 

FORMAT/CONF button 

on the originating handset to conference with the receiving handset and 
the external caller. 

CONFERENCE shows in the display on the originating and 

receiving handsets.

During an external call, you may transfer the external call to another handset.
1.  Press the 

INTERCOM button on the originating handset to put an external call 

on hold, and then page the receiving handset.

2.  Use the touch-tone pad on the handset to select Handset #. You will hear a 

paging tone. 

PAGING shows on the originating handset’s display, and PAGING 

FROM... shows on the receiving handset’s display.

3.  When the receiving handset connects, press the 

TALK/CALL BACK button on the 

originating handset to transfer the call.

   

-OR-

4.  Press the 

TALK/CALL BACK button on the originating handset to transfer the 

call. If the receiving handset does not answer within 30 seconds, the originating 
handset rings back and displays 

CALLBACK. If the originating handset does not 

answer within 20 seconds, the call is automatically dropped.

If trouble is experienced with this equipment, for warranty information, please 

contact customer service at 

1-800-448-0329.  If the equipment is causing 

harm to the telephone network, the telephone company may require that you 

disconnect the equipment until the problem is resolved.
Any unauthorized repairs, changes or modifications not expressly approved 

by Thomson Inc. could void the user’s authority to operate this product.  

For instructions on how to obtain a replacement unit, refer to the warranty 

included in this guide or call customer service at 

1-800-448-0329.

Or refer inquiries to:

Attach your sales receipt to this booklet for future reference or jot down the 

date this product was purchased or received as a gift. This information will be 

valuable if service should be required during the warranty period.

Purchase date 

Name of store