Справочник Пользователя для honda-automobiles 2008 accord coupe
Place the flat tire face down in the
spare tire well.
spare tire well.
Remove the spacer cone from the
wing bolt, turn it over, and put it
back on the bolt.
wing bolt, turn it over, and put it
back on the bolt.
To remove the spacer cone, squeeze
the tabs on the wing bolt to
disengage it from the center of the
spacer cone, then pull the bolt
downward.
the tabs on the wing bolt to
disengage it from the center of the
spacer cone, then pull the bolt
downward.
To install the wing bolt to the spacer
cone, reverse this procedure.
cone, reverse this procedure.
Secure the flat tire by screwing
the wing bolt back into its hole.
the wing bolt back into its hole.
Store the jack and tools in the tool
kit case. Place the tool kit case in
the flat tire.
kit case. Place the tool kit case in
the flat tire.
Your vehicle’s original tire has a
tire pressure monitoring system
sensor. To replace a tire, refer to
tire pressure monitoring system
sensor. To replace a tire, refer to
(see
page
).
Lower the trunk floor, then close
the trunk lid.
the trunk lid.
Store the center cap in the trunk.
Make sure it does not get
scratched or damaged.
Make sure it does not get
scratched or damaged.
16.
17.
19.
18.
20.
21.
22.
286
Changing a Flat Tire
Changing a Tire with TPMS
T
a
k
ing
Ca
re
Ca
re
of
th
th
e
U
ne
x
x
p
e
c
te
d
353
WING BOLT
SPACER CONE
SPACER CONE
TAB
Loose items can fly around the
interior in a crash and could
seriously injure the occupants.
interior in a crash and could
seriously injure the occupants.
Store the wheel, jack, and tools
securely before driving.
securely before driving.
07/08/06 12:54:52 31TE0600 0358