Справочник Пользователя для Hitachi CJ 90VST

English

MAINTENANCE AND INSPECTION

WARNING:

Be sure to switch power OFF and disconnect the plug from the

receptacle during maintenance and inspection.

1. Inspecting the blade

Continued use of a dull or damaged blade will result in reduced cutting eﬃ ciency and may

cause overloading of the motor. Replace the blade with a new one as soon as excessive

abrasion is noted.

2. Maintenance of the motor

The motor unit winding is the very “heart” of the power tool. Exercise due care to ensure the

winding does not become damaged and/or wet with oil or water.

WARNING:

Using this Jig Saw with loosen screws is extremely dangerous.

3. Maintenance of the motor

The motor unit winding is the very “heart” of the power tool. Exercise due care to ensure the

winding does not become damaged and/or wet with oil or water.

4. Service and repairs

All quality power tools will eventually require servicing or replacement of parts because of

wear from normal use. To assure that only authorized replacement parts will be used, all

service and repairs must be performed by a HITACHI AUTHORIZED SERVICE CENTER,

ONLY.

5. Service parts list

CAUTION: Repair, modifi cation and inspection of Hitachi Power Tools must be

carried out by an Hitachi Authorized Service Center.

This Parts List will be helpful if presented with the tool to the Hitachi

Authorized Service Center when requesting repair or other maintenance.

In the operation and maintenance of power tools, the safety regulations

and standards prescribed in each country must be observed.

MODIFICATIONS:

Hitachi Power Tools are constantly being improved and modifi ed to incorporate the latest

technological advancements.

Accordingly, some parts may be changed without prior notice.

000Book_CJ90VST_US.indb 13

2010/08/03 16:02:23