Справочник Пользователя для Hitachi CJ 90VST

8

○  Cutting various lumber and pocket cutting

○  Cutting mild steel plate, aluminum plate, and copper plate

○  Cutting plastics, such as phenol resin and vinyl chloride

○  Cutting thin and soft construction materials

○  Cutting stainless steel plate (With No. 97 blade)

1. Power source

  Ensure that the power source to be utilized conforms to the power source requirements 

specifi ed on the product nameplate.

2. Power switch

  Ensure that the switch is in the OFF position. If the plug is connected to a receptacle while 

the switch is in the ON position, the power tool will start operating immediately and can cause 

serious injury.

3. Extension cord

  When the work area is far away from the power source, use an extension cord of suffi  cient 

thickness and rated capacity. The extension cord should be kept as short as practicable.

4.  Check the receptacle

 

Check the receptacle

  If the receptacle only loosely accepts the plug, the receptacle must be repaired. Contact a 

licensed electrician to make appropriate repairs.

 

If such a fautly receptacle is used, it may cause overheating, resulting in a serious hazard.

5. Confi rming condition of the environment:

 Confi rm that the work site is placed under appropriate conditions conforming to prescribed 

precautions.

000Book_CJ90VST_US.indb   8

000Book_CJ90VST_US.indb   8

2010/08/03   16:02:22

2010/08/03   16:02:22