Справочник Пользователя для Cadillac deville 2000
2-41
Windshield Wipers
WIPER: Turn the band on the turn signal lever to
control the wipers.
control the wipers.
MIST: Turn the band toward you to“mist” and then
release it for a single wiping cycle. For more cycles,
hold the band on MIST longer.
release it for a single wiping cycle. For more cycles,
hold the band on MIST longer.
LO or HI: Turn the band away from you to either
LO (low speed) or to HI (high speed), depending on the
wiper speed you want.
LO (low speed) or to HI (high speed), depending on the
wiper speed you want.
DELAY: You can set the wiper speed for a long or short
delay between wipes with this setting. Turn the band to
one of the DELAY positions. The closer you move it to
LO, the shorter the delay.
delay between wipes with this setting. Turn the band to
one of the DELAY positions. The closer you move it to
LO, the shorter the delay.
OFF: Turn the band to OFF to turn off the wipers.
Be sure to clear ice and snow from the wiper blades
before using them. If they’re frozen to the windshield,
carefully loosen or thaw them. If the blades do become
damaged, get new blades or blade inserts.
before using them. If they’re frozen to the windshield,
carefully loosen or thaw them. If the blades do become
damaged, get new blades or blade inserts.
Heavy snow or ice can overload the wiper motor.
A circuit breaker will stop the motor until it cools.
Clear away snow or ice to prevent an overload.
A circuit breaker will stop the motor until it cools.
Clear away snow or ice to prevent an overload.