Справочник Пользователя для Cissell cissiman38

Refer to illustration sheet

(1)

UNCRATE MACHINE.  Check the nameplate voltage and current, making sure
it is the same as the supply voltage and current.

(2)

SET MACHINE IN POSITION.

(3)

REMOVE THE REVOLVING FORM by holding the turning knob and the
opposite weight “bucket” and lifting approximately 22”.

(4)

CONNECT STEAM SUPPLY LINE as shown on next page.

(5)

CONNECT RETURN LINE as shown on next page.

NOTE:

Before final return line connection is made, open the steam supply
valve and blow all foreign matter out of the steam lines and
chamber.  Failure to do so will cause trap to leak.

(6)

MAKE ELECTRICAL CONNECTIONS in 3” junction box on rear of the
machine, according to applicable electric codes.  Connections should include a
fused disconnect switch or circuit breaker with “slo-blow” characteristics and be
capable of carrying 15 amps 115 volts or 8 amps 230 volts.

(7)

MAKE SURE THE CONDENSER VALVE IS OPEN (condenser located behind
the air filter) before connecting clothes tree.

(8)

CONNECT CLOTHES TREE TO REAR OF BASE by the two 1/4” bolts.

(9)

TURN ON ELECTRICAL POWER AND TEST THE MACHINE.  Replace the
revolving assembly, remove the plastic protective bag, and open the return and
steam lines.