Справочник Пользователя для Ingersoll-Rand PM20X-X-X-B02

CCN 15227689

OPERATOR’S MANUAL

PM20X-X-X-B02

RELEASED:

2-8-05

REVISED:

5-6-10

(REV. 03)

INCLUDING: OPERATION, INSTALLATION & MAINTENANCE

2” DIAPHRAGM PUMP

1:1 RATIO (METALLIC)

READ THIS MANUAL CAREFULLY BEFORE INSTALLING,

OPERATING OR SERVICING THIS EQUIPMENT.

It is the responsibility of the employer to place this information in the hands of the operator. Keep for future reference.

SERVICE KITS

Refer to “Model Description Chart” to match the pump material options.

637309-XX for fluid section repair (see page 4). NOTE: This kit also con-

tains several air motor seals which will need to be replaced.

637374-X major air valve assembly (see page 7).

637421 for air section repair (see page 6).

PUMP DATA

Models

see Model Description Chart for “-XXX”.

. . . . . . . . . . . .

Pump Type

Metallic Air Operated Double Diaphragm

. . . . . . . . .

Material

see Model Description Chart.

. . . . . . . . . . . .

Weight

PM20A-CSS-XXX-B02

142.8 lbs (64.8 kgs)

. . .

PM20S-CSS-XXX-B02

171.7 lbs (77.9 kgs)

. . .

Maximum Air Inlet Pressure

120 p.s.i.g. (8.3 bar)

. . . . . . . . .

Maximum Material Inlet Pressure

10 p.s.i.g. (0.69 bar)

. . . . .

Maximum Outlet Pressure

120 p.s.i.g. (8.3 bar)

. . . . . . . . . .

Maximum Flow Rate

172 g.p.m. (651 l.p.m.)

. . . . . . . . . . . . . .

Displacement / Cycle @ 100 p.s.i.g.

1.4 gal. (5.3 lit.)

. . .

Maximum Particle Size

1/4” dia. (6.4 mm)

. . . . . . . . . . . .

Maximum Temperature Limits

(diaphragm / ball / seal material)

E.P.R.

-60_ to 280_ F (-51_ to 138_ C)

. . . . . . . . . . . . . . . . .

SantopreneR

-40_ to 225_ F (-40_ to 107_ C)

. . . . . . . . . . .

PTFE

40_ to 225_ F (4_ to 107_ C)

. . . . . . . . . . . . . . . . .

Dimensional Data

see page 8.

. . . . . . . . . . . . . . . .

Mounting Dimension

9-1/16” x 10-1/16” (230 mm x 256 mm)

. . . . .

Noise Level

@ 70 p.s.i., 60 c.p.m.

{

85.0 db(A)

. . . .

Tested with 67263 muffler assembly installed.

The pump sound pressure levels published here have been updated to an Equivalent

Continuous Sound Level (L

Aeq

) to meet the intent of ANSI S1.13-1971, CAGI-PNEU-

ROP S5.1 using four microphone locations.

NOTICE: All possible options are shown in the chart, however, certain

combinations may not be recommended, consult a representative or the

factory if you have questions concerning availability

2” DIAPHRAGM PUMP

PM20S-CSS-XXX-B02

Figure 1

MODEL DESCRIPTION CHART

PM20 X - C S S - X X X - B02

PM20X - CSS - X X X - B02

637309 - X X

Diaphragm

Ball

FLUID SECTION SERVICE KIT SELECTION

EXAMPLE: MODEL # PM20S-CSS-SAA-B02

FLUID SECTION SERVICE KIT # 637309-AA

SEAT MATERIAL

A - Santoprene

S - 316 Stainless Steel

DIAPHRAGM MATERIAL

A - Santoprene

T - PTFE / Santoprene

HARDWARE MATERIAL

S - Stainless Steel

FLUID CAPS & MANIFOLD MATERIAL

S - Stainless Steel

PORT

C - Tri-Clamp

CENTER SECTION MATERIAL

A - Aluminum

S - Stainless Steel

BALL MATERIAL

A - Santoprene

T - PTFE

INGERSOLL RAND COMPANY LTD

209 NORTH MAIN STREET – BRYAN, OHIO 43506

(800) 495-0276 FAX(800) 892-6276