Справочник Пользователя для Behringer Sonic Exciter SX3040

SONIC EXCITER SX3040 User Manual

4.2.2  Connection with insert cables
Use standard ¼" insert cables to connect the SONIC EXCITER to the insert path of 

a mixing console. These Y cables have two ¼" TS connectors at one end, and one 

¼" TRS connector at the other. Connect the plug marked “Send” to the INPUT 

L jack on the effects unit. Connect the “Return” plug to the OUTPUT L jack on 

the device. Connect the TRS connector to the insert jack of the channel strip on 

the mixing console. Use two insert cables for stereo sub-groups and main-mix 

inserts. The second cable must be connected to the INPUT/OUTPUT R jacks of 

the SX3040. 

Return

(out)

Send

(in)

return (in)
tip

Fig. 4.4: Insert cable with one ¼

"

 TRS (tip-ring-sleeve) jack plug on one end andtwo ¼

"

 TS 

(tip-sleevel) jack plugs on the other end

Connections 

XLR sockets and ¼" stereo jacks

Type Balanced
Input impedance 

20 kΩ balanced, 10 kΩ unbalanced

Nominal input level 

+4 dBu

Maximum input level 

+22 dBu

Connections 

XLR sockets and ¼" stereo jacks

Type Servo-balanced
Output impedance 

60 Ω balanced, 60 Ω unbalanced

Maximum output level 

+22 dBu

Type 

Frequency-selective compressor with 

phase shifter

Filter cut-off frequency 

50 Hz to 160 Hz

Type 

Harmonic exciter

Filter cut-off frequency 

1.3 kHz to 10 kHz

Frequency response 

10 Hz to 120 kHz, ± 3 dB

Signal-to-noise ratio  

>90 dB, unweighted, 20 Hz to 20 kHz

Distortion (THD + N) 

0.005 % typ. @ +4 dBu, 1 kHz (IN)

Crosstalk 

>90 dB

USA/Canada 

120 V AC, 60 Hz

China/Korea 

220 V AC, 50/60 Hz

Europe/UK/Australia 

230 V AC, 50 Hz

Japan 

100 V AC, 50-60 Hz

Export model 

120/230 V AC, 50-60 Hz

Power consumption 

approx. 12 W

Fuse 

100-120 V AC: T 250 mA, H 250 V 

220-240 V AC: T 125 mA, H 250 V