Справочник Пользователя для Jenn-Air JES9900

Do not use oven cleaners.

Food spills should be cleaned when oven cools. At high 
temperatures, foods react with porcelain and staining, etching, 
pitting or faint white spots can result.

■

Self-Cleaning cycle:

See “Self-Cleaning Cycle” first.

■

Self-Cleaning cycle:

See “Self-Cleaning Cycle” first. Remove racks or they will 
discolor and become harder to slide. If this happens, a light 
coating of vegetable oil applied to the rack guides will help 
them slide.

■

Steel-wool pad

■

Lift the vent grill off the cooktop.

■

Wipe clean or wash in sink:

Nonabrasive plastic scrubbing pad and mildly abrasive 
cleanser

■

Dishwasher:

Use mild detergent.

The filter is a permanent type and should be cleaned when soiled.

■

Turn off the downdraft ventilation system before removing the 
filter.

■

Remove vent grill then lift the filter out of the vent chamber.

■

Clean the filter in the sink with warm water and detergent or in 
the dishwasher.

■

Replace the filter.

The filter should always be placed at an angle. As you face 
the front of the range, the top of the filter should rest against 
the left side of the vent opening. The bottom of the filter 
should rest against the right side of the vent chamber at the 
bottom.

If the filter is flat against the fan wall, ventilation effectiveness 
will be reduced.

The ventilation chamber, which houses the filter, should be 
cleaned in the event of spills or when it becomes coated with a 
film of grease.

■

Mild household detergent or cleanser and paper towel, damp 
cloth or sponge:

Apply detergent or cleanser to paper towel, damp cloth or 
sponge, not directly to the ventilation chamber.

The oven uses a 120-volt, 20-watt maximum halogen bulb. See 
the “Assistance or Service” section to order. Ask for Part Number 
74004458.

Before replacing, make sure the oven is off and cool.

1. Unplug range or disconnect power.

2. Use fingertips to grasp edge of bulb cover. Pull out and 

remove.

3. Remove bulb from socket by pulling straight out of the 

ceramic base.

4. Replace bulb, using tissue or wearing cotton gloves to handle 

bulb. To avoid damage or decreasing the life of the new bulb, 
do not touch bulb with bare fingers. 

5. Replace bulb cover by snapping back into place.

6. Plug in range or reconnect power.

A