Справочник Пользователя для Lowrance radar and rim 200 operation

Before adjusting the Trigger Delay for 4 kW radars, two rings will be

shown on the screen (left). As Trigger Delay is increased, the larger

ring will start to get smaller. The small ring will disappear (right).

You may have to increase gain in the previous step if the rings are not

visible. Increase gain until you have solid red rings shown on the
screen, like in the preceding example. Increasing Gain too much can

cause the rings to be distorted.
4. Press

↑ to increase the level of Trigger Delay, which will decrease the

size of the ring. If you have a 4 kW radar, as the large ring decreases in

size, the smaller ring in the center of the screen will disappear, leaving

only one ring.

Increase Trigger Delay to diminish the size of the red ring (left). To set

Trigger Delay correctly, reduce the ring to as small a size as possible,

while keeping a black circle in the middle (enlarged view, right).

In either case, continue to increase the Trigger Delay level until the
ring is as small as possible, while keeping a black circle in the middle.

Every radar is different, but typically, a setting between 35 and 42 per-

cent will get the job done.
If you over apply the Trigger Delay, the black circle will disappear. De-

crease the Trigger Delay level and it will reappear.
3. Press

EXIT

to return to the main page display.