Справочник Пользователя для jetway 630dfr1a

 
 
 
                                                                                                                                                                                                                                                                                                                                                         

 
 
 

 

 

↑↓→← Move Enter:Select Item +/-/PU/PD:Value F10:Save ESC:Exit  F1:General Help 

 
Onboard FDD Controller 
Select Enabled if your system has a floppy disk controller (FDD) installed on the system 
board and you wish to use it.  If you install add-on FDC or the system has no floppy drive, 
select Disabled in this field.  The settings are: Enabled and Disabled. 
 
Onboard Serial Port 1/Port 2 
Select an address and corresponding interrupt for the first and the second serial ports.  The 
settings are: 3F8/IRQ4, 2E8/IRQ3, 3E8/IRQ4, 2F8/IRQ3, Disabled, Auto. 
 
UART 2 Mode  
This item allows you to determine which InfraRed(IR) function of the onboard I/O chip, this 
functions uses. 
 
Onboard Parallel Port 
There is a built-in parallel port on the on-board Super I/O chipset that Provides Standard, 
ECP, and EPP features. It has the following option: 

Disabled 

 

(3BCH/IRQ7)/  Line Printer port 0 
(278H/IRQ5)/   Line Printer port 2 
(378H/IRQ7)  

Line Printer port 1 

 
Parallel Port Mode 

SPP   : Standard Parallel Port 
EPP   : Enhanced Parallel Port 
ECP  : Extended Capability Port