Справочник Пользователя для BBE Sound ars2
2
3
4
5
1. LO CONTOUR
This control regulates the amount of phase compensated bass equalization for both channels. This
adjustment ranges from 0dBu (fully counter-clockwise) to +10dBu (fully clockwise).
adjustment ranges from 0dBu (fully counter-clockwise) to +10dBu (fully clockwise).
2. DEFINITION
This control regulates the amount of phase compensated high frequency processing for both
channels. When the knob is in its minimum position (counter-clockwise), there is no processing.
Turning the knob clockwise will introduce and increase the processing activity to a maximum level
of 10dBu. Adjust the knob to mix the desired amount of processing. A good position to start with
is the center position (12 o'clock).
channels. When the knob is in its minimum position (counter-clockwise), there is no processing.
Turning the knob clockwise will introduce and increase the processing activity to a maximum level
of 10dBu. Adjust the knob to mix the desired amount of processing. A good position to start with
is the center position (12 o'clock).
3. STATUS LED DISPLAY
This bi-colored LED lamp glows green when the BBE process button is in the “on” position, and
red when the process button is in the “off” position.
red when the process button is in the “off” position.
4. PROCESS
This switch activates the entire processing circuit. When depressed, the “in” position, the processor
has been engaged. When in the “out” position, the processor has been disengaged.
has been engaged. When in the “out” position, the processor has been disengaged.
5. POWER
This switch applies AC power to the BBE ARS. When the power is on, the STATUS LED lamp
will illuminate.
will illuminate.
FRONT PANEL
3
MIN
MAX
MIN
MAX
ARS
LO CONTOUR
DEFINITION
PROCESS
POWER
IN
OUT
STATUS
®
full frequency focus™
1