Справочник Пользователя для husky-liners 6132

6132.doc

11/08/2004

CARE AND USE INSTRUCTIONS

     Your new floor liners are custom molded to fit your particular vehicle. The liners are made to take the place

of your factory floor mats. For correct fit, it is necessary to remove the factory floor mat before installing your

new floor liners. However, do not remove the factory-installed carpeting.

      Your liners are made from an engineering resin that is lightweight and extremely tough and durable. The

easiest way to clean your liners is with a damp cloth or sponge. If using a cleaner, 409

®

 or Glass Plus

®

 work

well. Use of Armor All

®

, Son-of-a-Gun

®

 or similar items is discouraged as these products make the liners slick.

SOME SILVERADO/SIERRA OWNERS WILL NEED TO TRIM THEIR DRIVER’S SIDE LINER AS SHOWN ABOVE (TOP)
TO  ALLOW  FOR  AN  OPTIONAL  LONGER  CENTER  CONSOLE  (BETWEEN  THE  TWO  FRONT  BUCKET  SEATS).  TRIM
AWAY THE LOWERED AREA (WHERE THE LINER MEETS THE CONSOLE) USING THE OFFSET STEP IN THE LINER
AS A GUIDE. A UTILITY KNIFE OR HEAVY SHEARS WORK WELL FOR TRIMMING

LEFT OR

DRIVER’S

SIDE

RIGHT OR

PASSENGER’S

SIDE

NOTICE: RIGHT LINER

OVERLAPS LEFT LINER

NOTE: THIS LINER  (PART #6132) FITS SILVERADO/SIERRA EXTENDED CAB TRUCKS EQUIPPED WITH THE
OPTIONAL FACTORY STORAGE BOX LOCATED UNDER THE REAR SEATS. IF YOU DO NOT HAVE THE STORAGE
BOX AND WOULD LIKE A LINER THAT COVERS TO THE BACK WALL OF THE CAB, YOU NEED PART #6136.