Руководство По Работе для Panasonic KX-MC6040
1. Introduction and Installation
11
Detailed operating instructions are on the CD-ROM, or can be viewed at www.panasonic.com/help
Note:
L
If any other device is connected to the same
telephone line, this unit may disturb the network
condition of the device.
telephone line, this unit may disturb the network
condition of the device.
Using surge protectors
L
The warranty does not cover damage due to power
line surges or lightning. For additional protection, we
recommend using a surge protector (
line surges or lightning. For additional protection, we
recommend using a surge protector (
j).
Using network router/network hub
L
We recommend using network routers/network hubs
(
(
6) under secure network environments. Consult
your network administrator for firewall settings, etc.
L
The warranty does not cover damage due to security
problems or any disadvantages relating to it.
problems or any disadvantages relating to it.
1.4 Turning the power switch ON
Turn the power switch to the ON position (
1).
1.5 Dialing mode
If you cannot dial, change this setting according to your
telephone line service.
telephone line service.
1
{
Menu}
2
Press {#}{1}{2}{0} to display “
Dialing Mode”.
3
Press {1} or {2} to select the desired setting.
{
{
1} “
Pulse”: For rotary/pulse dial service.
{
2} “
Tone” (default): For tone dial service.
4
{
Set}
5
Press {Menu} to exit.
1.6 Selecting the operation mode
(Scan/Copy/Fax)
(Scan/Copy/Fax)
You can select the desired mode by pressing one of the
following buttons.
following buttons.
–
{
Scan}: Select this mode when using the unit as a
scanner.
–
{
Copy}: Select this mode when using the unit as a
copier.
–
{
Fax}: Select this mode when using the unit as a fax
machine.
4 Answering machine (not supplied)
5 To the internet
6 Network router/Network hub (not supplied)
L
Also connect networked computers.
7 LAN cable (not supplied)
L
To assure continued emission limit compliance,
only use a shielded LAN cable (category 5
straight cable).
only use a shielded LAN cable (category 5
straight cable).
8 Handset unit (optional) connection jack
L
You can connect the optional handset unit.
Remove the cover if attached.
Remove the cover if attached.
9 Automatic duplex unit (optional) connector
IMPORTANT NOTICE FOR THE USB
CONNECTION
CONNECTION
L
DO NOT CONNECT THE UNIT TO A
COMPUTER WITH THE USB CABLE UNTIL
PROMPTED BY THE MULTI-FUNCTION
STATION (page 13).
COMPUTER WITH THE USB CABLE UNTIL
PROMPTED BY THE MULTI-FUNCTION
STATION (page 13).
1
MC6040-PNQW1437ZA-QRG-en.book Page 11 Wednesday, July 16, 2008 3:31 PM