Руководство По Работе для Panasonic DP-C406
150
Chapter 5
Internet Fax
Function Parameters for Relay Stations
Program the following parameters to use this machine as a relay station in Function Parameters:
Item
Required Function Parameters
Explanation
1
Fax Parameters
“142 Relay XMT”
“142 Relay XMT”
Selecting whether the machine will accept and perform G3
Relayed transmission.
Relayed transmission.
• Invalid
Machine will not accept a Relay XMT request.
• Valid
Machine will accept a Relay XMT request.
2
Fax Parameters
“143 Relay XMT Report”
“143 Relay XMT Report”
Selecting how the Communication Journal for Relayed
transmission is sent to the originator.
transmission is sent to the originator.
• Off
Does not send.
• Always
The Communication Journal is always sent after a Relay
communication is completed or has failed.
communication is completed or has failed.
• Inc Only
The Communication Journal is sent if the Relay communication
to the destination has failed.
to the destination has failed.
3
Fax Parameters
“36 Relay XMT Password”
“36 Relay XMT Password”
Enter a Relay XMT Password (up to 10 characters) to be used for
the protection against unauthorised (outside) stations from
accessing your machine to relay messages to a G3 fax machine
via PSTN. This password should be given out to authorised
people only.
As the relay password is transmitted in the header of Email, it
should be differentiated from the Email address used by Email or
Internet Fax. A relay password pre-programmed in this way would
be easy to identify when Internet Fax is received.
the protection against unauthorised (outside) stations from
accessing your machine to relay messages to a G3 fax machine
via PSTN. This password should be given out to authorised
people only.
As the relay password is transmitted in the header of Email, it
should be differentiated from the Email address used by Email or
Internet Fax. A relay password pre-programmed in this way would
be easy to identify when Internet Fax is received.
4
Fax Parameters
“45 Relay Domain (01)” to “54
Relay Domain (10)”
“45 Relay Domain (01)” to “54
Relay Domain (10)”
Register up to 10 Domain Names (up to 30 characters) that your
machine will accept Relayed transmission.
Requests to relay a message to another G3 fax machine via
PSTN.
machine will accept Relayed transmission.
Requests to relay a message to another G3 fax machine via
PSTN.
Ex: Registered Domain Names
(01): panasonic.co.jp
(02): abc.iFax.com
(03): panasonic.com
(02): abc.iFax.com
(03): panasonic.com
z
To increase network security by protecting from third party
access to the relay station, enter a relay-permitted domain
name and an administrator’s Email address for every relay
station.
access to the relay station, enter a relay-permitted domain
name and an administrator’s Email address for every relay
station.
z
If the whole domain name is left blank, Internet Fax will receive
Relayed transmission requests from all the domain names.
Relayed transmission requests from all the domain names.
5
Fax Parameters
“37 Manager's Email Addr”
“37 Manager's Email Addr”
Register the department manager’s Email address for
supervising, and cost control purposes. Once registered, the
machine will send an Email notification to the Email address for
each Relayed XMT Request received from a remote station. The
following information is sent.
(From: The Email address of the originating station)
(To: The telephone number of the destination G3 fax machine)
supervising, and cost control purposes. Once registered, the
machine will send an Email notification to the Email address for
each Relayed XMT Request received from a remote station. The
following information is sent.
(From: The Email address of the originating station)
(To: The telephone number of the destination G3 fax machine)