Руководство По Работе для Panasonic DP-C406
![Panasonic](https://files.manualsbrain.com/attachments/8f677e63fb64cbb6c62d09e6242996e7631380a8/common/fit/150/50/34d700d3fb727c767799b2da5cc474b219c0a4312e9e3044c99491a2fb9a/brand_logo.png)
Chapter 2 Basi
c Fax Transmission
40
Verification Stamp
This function confirms successful transmission or storage into the memory by stamping at the bottom
of each successfully transmitted original(s) with a small “x” mark.
of each successfully transmitted original(s) with a small “x” mark.
z
The scanned document(s) are stamped after feeding through the ADF.
z
The standard setting of the Verification Stamp is “Off”. The stamp setting can be changed with the Function
Parameter “04 Stamp (HOME)” (Fax/Email Settings > Fax Parameters). For instructions on how to change the
standard setting, refer to Fax/Email Settings in the Operating Instructions (For Function Parameters) of
provided CD-ROM.
Parameter “04 Stamp (HOME)” (Fax/Email Settings > Fax Parameters). For instructions on how to change the
standard setting, refer to Fax/Email Settings in the Operating Instructions (For Function Parameters) of
provided CD-ROM.
z
The machine can be configured not to stamp the documents stored in the memory by changing the setting of
the Function Parameter “28 Stamp at Memory XMT” (Fax/Email Settings > Fax Parameters). For instructions
on how to configure the verification stamp, refer to Fax/Email Settings in the Operating Instructions (For
Function Parameters) of provided CD-ROM.
the Function Parameter “28 Stamp at Memory XMT” (Fax/Email Settings > Fax Parameters). For instructions
on how to configure the verification stamp, refer to Fax/Email Settings in the Operating Instructions (For
Function Parameters) of provided CD-ROM.
z
The Verification Stamp function is available when scanning documents with the ADF.
z
Because the verification stamp cannot be deleted, be careful not to use the verification stamp when
transmitting important document(s).
transmitting important document(s).
Ex: Scanning Direction
Verification Stamp
1
Place original(s) on the ADF.
z
Refer to Placing Originals (see page 14).
2
Press the Fax key.
3
Select “Basic Menu”.