Инструкции Пользователя для NAD C 516BEE

Packed with your C 516BEE you will find:
•  An audio cable connector
•  The CD 7 remote control with 2 (two) AAA batteries
•  This owner’s manual

SAVE THE PACKAGING
Please save the box and all of the packaging in which your C 516BEE 
arrived. Should you move or otherwise need to transport your C 516BEE, 
this is by far the safest container in which to do so. We’ve seen too many 
otherwise perfect components damaged in transit for lack of a proper 
shipping carton, so please: Save that box!

CHOOSING A LOCATION
Choose a location that is well ventilated (with at least several inches to 
both sides and behind), and that will provide a clear line of sight, within 
25 feet/8 meters, between the C 516BEE’s front panel and your primary 
listening/viewing position. This will ensure reliable infrared remote control 
communications. The C 516BEE generates a modest amount of heat, but 
nothing that should trouble adjacent components. It is perfectly possible to 
stack the C 516BEE on top of other components. 

NOTE ON INSTALLATION
IMPORTANT! Install the C 516BEE Compact Disc player on a level, vibration-
free surface. Severe vibration or operation in a tilted position may cause 
the player to mis-track. The player may be stacked with other stereo 
components, as long as there is adequate ventilation around it. If the 
C 516BEE is placed in close proximity to a radio tuner (AM or FM), a VCR or 
a television set, the operation of its digital circuits may produce static that 
would interfere with reception of weak broadcast signals. If this occurs, 
move the C 516BEE away from other devices or switch it off when viewing 
or listening to broadcasts.

In case you simply cannot wait to experience the performance of your new 
NAD C 516BEE, we provide the following “Quick Start” instructions to get 
you underway.  

Please make all the connections to your C 516BEE with the unit unplugged.  
It is also advisable to power-down or unplug all associated components 
while making or breaking any signal or AC power connections.

PLAY A CD 
1  Connect a twin RCA-to-RCA lead from the L (left) and R (right) Line 

Output jacks to the corresponding CD inputs on your amplifier.

2  Plug in the AC power cord.
3  Press the POWER button to turn ON the player.
4  Press [OPEN/CLOSE] to open the disc drawer.
5  Place a CD, label side up, in the tray’s circular recess. Be certain that the 

disc is centered within the recess.

6  Press [PLAY]. The drawer closes automatically, and the disc begins to 

play.

7  At any time you may press [SKIP 

 or 

] to select different tracks on 

the disc.

8  Press [PAUSE] if you want to stop play temporarily while keeping the 

pickup at its current position on the disc. Press [PAUSE] again or [PLAY] 
when you want to resume playback. Press STOP if you want to end play 
and reset the pickup to the beginning of the disc.