Справочник Пользователя для Moxa PT-7710-F-HV
1
w w w. m o x a . c o m
i n f o @ m o x a . c o m
Industry-specific Ethernet Switches
IEC 61850-3 / EN50155 8+2G-port Gigabit modular managed
rackmount Ethernet switches
IEC 61850-3, IEEE 1613 (power substations), NEMA TS2 (traffic
›
control systems), and EN50155/EN50121-4 (railway applications)
compliant
compliant
IEEE 1588 PTP for precise time synchronization of networks
›
Up to 12 ports with M12 connectors
›
Turbo Ring, Turbo Chain, and IEEE 802.1D-2004 RSTP/STP for
›
Ethernet redundancy
Universal power supply range, 12/24/48 VDC or 110/220 VDC/VAC
›
NERC CIP compliance
›
-40 to 85°C operating temperature range
›
PT-7710 Series
The PowerTrans PT-7710 is designed to meet the demands of power
substation automation systems (IEC 61850-3, IEEE 1613), traffic
control systems (NEMA TS2), and railway applications (EN50155/
EN50121-4). The PT-7710’s Gigabit and fast Ethernet backbone,
redundant ring, and 12/24/48 VDC dual redundant power supplies
substation automation systems (IEC 61850-3, IEEE 1613), traffic
control systems (NEMA TS2), and railway applications (EN50155/
EN50121-4). The PT-7710’s Gigabit and fast Ethernet backbone,
redundant ring, and 12/24/48 VDC dual redundant power supplies
or 110/220 VDC/VAC power supplies increase the reliability of the
communications and reduce cabling and wiring costs. The modular
design of the PT-7710 makes network planning easy, and allows
greater flexibility by letting you install up to 2 Gigabit ports and 8 fast
Ethernet ports, or 10 fast Ethernet ports.
communications and reduce cabling and wiring costs. The modular
design of the PT-7710 makes network planning easy, and allows
greater flexibility by letting you install up to 2 Gigabit ports and 8 fast
Ethernet ports, or 10 fast Ethernet ports.
Technology
Standards:
IEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X) and 100Base FX
IEEE 802.3ab for 1000BaseT(X)
IEEE 802.3z for 1000BaseX
IEEE 802.3x for Flow Control
IEEE 802.1D for Spanning Tree Protocol
IEEE 802.1w for Rapid STP
IEEE 802.1Q for VLAN Tagging
IEEE 802.1p for Class of Service
IEEE 802.1X for Authentication
IEEE 802.3ad for Port Trunk with LACP
IEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X) and 100Base FX
IEEE 802.3ab for 1000BaseT(X)
IEEE 802.3z for 1000BaseX
IEEE 802.3x for Flow Control
IEEE 802.1D for Spanning Tree Protocol
IEEE 802.1w for Rapid STP
IEEE 802.1Q for VLAN Tagging
IEEE 802.1p for Class of Service
IEEE 802.1X for Authentication
IEEE 802.3ad for Port Trunk with LACP
Protocols: IGMPv1/v2 device, GMRP, GVRP, SNMPv1/v2c/v3, DHCP
Server/Client, BootP, TFTP, SNTP, SMTP, RARP, RMON, HTTP,
HTTPS, Telnet, SSH, Syslog, DHCP Option 66/67/82, LLDP, Modbus/
TCP, IEEE 1588 PTP, IPv6, SNMP Inform
Server/Client, BootP, TFTP, SNTP, SMTP, RARP, RMON, HTTP,
HTTPS, Telnet, SSH, Syslog, DHCP Option 66/67/82, LLDP, Modbus/
TCP, IEEE 1588 PTP, IPv6, SNMP Inform
Modular Rackmount Ethernet Switch System,
PT-7710
M1
M2
PT-7710
LNK/ACT
SPEED
FDX/HDX
FAULT
MASTER
COUPLER
STAT
PWR1
PWR2
RING PORT
COUPLER
PORT
MODE
3
7
4
8
2
6
1
5
2
1
M2
M1
Slot 1
Slot 2
Introduction
Specifications
IPv6 Ready logo awarded (IPv6 Logo Committee certified)
•
IEEE 1588 PTP (Precision Time Protocol) for precise time
•
synchronization of networks
DHCP Option 82 for IP address assignment with different policies
DHCP Option 82 for IP address assignment with different policies
•
Modbus/TCP industrial Ethernet protocol supported
•
Turbo Ring, Turbo Chain, and IEEE 802.1D-2004 RSTP/STP
•
IGMP snooping and GMRP for filtering multicast traffic from
•
industrial Ethernet protocols
IEEE 802.3ad, LACP for optimum bandwidth utilization
IEEE 802.3ad, LACP for optimum bandwidth utilization
•
Bandwidth management prevents unpredictable network status
•
Multi-port mirroring for online debugging
•
Automatic warning by exception through email, relay output
•
RMON for efficient network monitoring and proactive capability
•
Automatic recovery of connected device’s IP addresses
•
Line-swap fast recovery
•
Configurable by Web browser, Telnet/Serial console, Windows
•
utility, and ABC-01 automatic backup configurator
User passwords with multiple levels of security protect against
•
unauthorized configuration
SSH/HTTPS is used to encrypt passwords and data
SSH/HTTPS is used to encrypt passwords and data
•
Lock switch ports with 802.1x port-based network access control
•
so that only authorized clients can access the port
Disable one or more ports to block network traffic
Disable one or more ports to block network traffic
•
802.1Q VLAN allows you to logically partition traffic transmitted
•
between selected switch ports
Secure switch ports so that only specific devices and/or MAC
Secure switch ports so that only specific devices and/or MAC
•
addresses can access the ports
Radius/TACACS+ allows you to manage passwords from a central
Radius/TACACS+ allows you to manage passwords from a central
•
location (available in Q1 Y2011)
SNMPv3 provides encrypted authentication and access security
SNMPv3 provides encrypted authentication and access security
•
General Features and Benefits
Cyber-security Features