Листовка для Moxa NPort 6250-M-SC NPORT 6250-M-SC
Модели
NPORT 6250-M-SC
1
w w w. m o x a . c o m
i n f o @ m o x a . c o m
Terminal Servers
NPort® 6250 Series
Simple solution for connecting serial devices to a network
›
Secure operation modes for Real COM, TCP Server, TCP Client,
›
Pair Connection, Terminal, and Reverse Terminal
Non-standard baudrates supported with high precision
›
Choice of network medium: 10/100BaseTX or 100BaseFX
›
Enhanced remote configuration with HTTPS and SSH
›
Port buffers for storing serial data when the Ethernet is off-line
›
Supports IPv6
›
The 2-port NPort® 6250 device servers use the SSL and SSH
protocols to transmit encrypted serial data over Ethernet. Models
are available for connecting to a 10/100BaseTX copper Ethernet or
protocols to transmit encrypted serial data over Ethernet. Models
are available for connecting to a 10/100BaseTX copper Ethernet or
The NPort® 6250 device servers help guarantee reliability by providing
users with secure serial-to-Ethernet data transmission and a customer-
oriented hardware design. If the Ethernet connection fails, the NPort®
6250 will queue all serial data in its internal 64 KB port buffer. When
users with secure serial-to-Ethernet data transmission and a customer-
oriented hardware design. If the Ethernet connection fails, the NPort®
6250 will queue all serial data in its internal 64 KB port buffer. When
100BaseTX fiber network. Both single-mode and multi-mode fiber are
supported.
supported.
the Ethernet connection is re-established, the NPort® 6250 will
immediately release all of the data in the buffer in the order that it was
received. Users can increase the port buffer size by installing an SD
card.
immediately release all of the data in the buffer in the order that it was
received. Users can increase the port buffer size by installing an SD
card.
2-port RS-232/422/485 secure terminal servers
Ethernet Interface
Number of Ports: 1
Speed: 10/100 Mbps, auto MDI/MDIX
Connector: 8-pin RJ45
Magnetic Isolation: 1.5 KV built-in
Speed: 10/100 Mbps, auto MDI/MDIX
Connector: 8-pin RJ45
Magnetic Isolation: 1.5 KV built-in
Optical Fiber Interface
(NPort 6250-S-SC/6250-M-SC)
Fiber Port: 100BaseFX, SC connector
Distance:
Multi-mode: 0 to 2 km, 1310 nm (62.5/125 µm, 500 MHz*km)
Single mode: 0 to 40 km, 1310 nm (9/125 µm, 3.5 PS/(nm*km))
Min. TX Output:
Multi-mode: -20 dBm
Single-mode: -5 dBm
Max. TX Output:
Multi-mode: -14 dBm
Single-mode: 0 dBm
Sensitivity:
Multi-mode: -34 to -30 dBm
Single-mode: -36 to -32 dBm
Distance:
Multi-mode: 0 to 2 km, 1310 nm (62.5/125 µm, 500 MHz*km)
Single mode: 0 to 40 km, 1310 nm (9/125 µm, 3.5 PS/(nm*km))
Min. TX Output:
Multi-mode: -20 dBm
Single-mode: -5 dBm
Max. TX Output:
Multi-mode: -14 dBm
Single-mode: 0 dBm
Sensitivity:
Multi-mode: -34 to -30 dBm
Single-mode: -36 to -32 dBm
Serial Interface
Number of Ports: 2
Serial Standards: RS-232/422/485
Connector: DB9 male
RS-485 Data Direction Control: ADDC® (Automatic Data Direction
Control)
Serial Line Protection: 15 KV ESD protection for all signals
Console Port: Serial port 1 doubles as RS-232 console port
Serial Standards: RS-232/422/485
Connector: DB9 male
RS-485 Data Direction Control: ADDC® (Automatic Data Direction
Control)
Serial Line Protection: 15 KV ESD protection for all signals
Console Port: Serial port 1 doubles as RS-232 console port
Serial Communication Parameters
Data Bits: 5, 6, 7, 8
Stop Bits: 1, 1.5, 2
Parity: None, Even, Odd, Space, Mark
Flow Control: RTS/CTS, DTR/DSR, XON/XOFF
Baudrate: 50 bps to 921.6 Kbps (supports non-standard baudrates)
Pull High/Low Resistor for RS-485: 1 KΩ, 150 KΩ
Stop Bits: 1, 1.5, 2
Parity: None, Even, Odd, Space, Mark
Flow Control: RTS/CTS, DTR/DSR, XON/XOFF
Baudrate: 50 bps to 921.6 Kbps (supports non-standard baudrates)
Pull High/Low Resistor for RS-485: 1 KΩ, 150 KΩ
Serial Signals
RS-232: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
RS-422: Tx+, Tx-, Rx+, Rx-, GND
RS-485-4w: Tx+, Tx-, Rx+, Rx-, GND
RS-485-2w: Data+, Data-, GND
RS-422: Tx+, Tx-, Rx+, Rx-, GND
RS-485-4w: Tx+, Tx-, Rx+, Rx-, GND
RS-485-2w: Data+, Data-, GND
Memory Expansion Slot
Slot Type: SD socket (supports up to 1 GB)
Software
Network Protocols: ICMP, IP, TCP, UDP, DHCP, BOOTP, Telnet, DNS,
SNMP V1/V2c/V3, HTTP, SMTP, ARP, PPPoE, DDNS
Security Protocols: DES, 3DES, AES, SSH, SSL, HTTPS, RADIUS,
PAP, CHAP, TACACS+
Configuration Options: Web Console, Serial Console, Telnet Console,
Windows Search Utility
Windows Real COM Drivers: Windows 95/98/ME/NT/2000, Windows
XP/2003/Vista/2008/7 x86/x64, Embedded CE 5.0/6.0, XP Embedded
Fixed TTY Drivers: SCO Unix, SCO OpenServer, UnixWare 7,
UnixWare 2.1, SVR 4.2, QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX
5.x, HP-UX 11i
SNMP V1/V2c/V3, HTTP, SMTP, ARP, PPPoE, DDNS
Security Protocols: DES, 3DES, AES, SSH, SSL, HTTPS, RADIUS,
PAP, CHAP, TACACS+
Configuration Options: Web Console, Serial Console, Telnet Console,
Windows Search Utility
Windows Real COM Drivers: Windows 95/98/ME/NT/2000, Windows
XP/2003/Vista/2008/7 x86/x64, Embedded CE 5.0/6.0, XP Embedded
Fixed TTY Drivers: SCO Unix, SCO OpenServer, UnixWare 7,
UnixWare 2.1, SVR 4.2, QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX
5.x, HP-UX 11i
Specifications
Overview
Zero Data Loss if Ethernet Connection Fails