Справочник Пользователя для Acurix Networks Pty Ltd RX-4002-02
RX INN Installation Guide
Page: 9
Unpacking Equipment
Unpacking
The RX INN can be unpacked from the delivery box by the customer. Please ensure the
shipping contents are correctly supplied and it is advisable to take a few moments to
familiarise yourself with the contents of the delivery cartons.
shipping contents are correctly supplied and it is advisable to take a few moments to
familiarise yourself with the contents of the delivery cartons.
Each RX INN should be supplied inside either a polycarbonate enclosure or die cast
aluminium enclosure (cabinet). The cabinet will contain a notice on the lid that provides the
INN name and quality check information. If the INS network database has been populated
with the network design information for your network, then each INN name may be seen in
the map view of RAMP (RoamAD Management Platform). The extent of pre-configuration
required will differ for each customer. Depending on the agreement and the level of
configuration that the customer has agreed to, the network database in the INS may be
provided as empty, partially populated or fully populated.
aluminium enclosure (cabinet). The cabinet will contain a notice on the lid that provides the
INN name and quality check information. If the INS network database has been populated
with the network design information for your network, then each INN name may be seen in
the map view of RAMP (RoamAD Management Platform). The extent of pre-configuration
required will differ for each customer. Depending on the agreement and the level of
configuration that the customer has agreed to, the network database in the INS may be
provided as empty, partially populated or fully populated.
For shipping purposes, each INN has been safely packaged inside its cabinet. The packaging
material MUST be removed before connecting the INNs. Please remove the lid of each
cabinet and remove all packing material.
material MUST be removed before connecting the INNs. Please remove the lid of each
cabinet and remove all packing material.
With each INN, physically check that all components are accounted for and intact. Once you
have removed the packaging, you will see that the radio cards may have been taped for
travel; it is safe to leave this tape in place for the duration of testing.
have removed the packaging, you will see that the radio cards may have been taped for
travel; it is safe to leave this tape in place for the duration of testing.
Note that Ethernet cables and antenna coax cables are NOT provided as each
customer will have differing deployment requirements
customer will have differing deployment requirements
Please ensure that cabinets are not interchanged and that labels are not removed from the
equipment. This will ensure that antennas are correctly connected to the required port on the
correct INN.
equipment. This will ensure that antennas are correctly connected to the required port on the
correct INN.
Labeling
Do not remove any of the labeling from the equipment.