Справочник Пользователя для Interepoch Technology Inc. IWE1100
7
On the start page, you can review all the settings you have made. Changes are highlighted in
red
. If
they are OK, click Restart to restart the AP for the new settings to take effect.
NOTE:
About 7 seconds are needed for the AP to complete its restart process.
2.3. Deploying the AP
After the settings have been configured, deploy the AP to the field application environment. Connect
Ethernet client computers to the Ethernet switch ports of the AP.
Ethernet client computers to the Ethernet switch ports of the AP.
2.4. Setting up Client Computers
The TCP/IP and IEEE 802.11b-related settings of wireless client computers must match those of the
AP.
AP.
2.4.1. Configuring IEEE 802.11b-Related Settings
Before the TCP/IP networking system of a wireless client computer can communicate with other hosts,
the underlying wireless link must be established between this wireless computer and an AP.
the underlying wireless link must be established between this wireless computer and an AP.
To establish a wireless link to an AP:
1.
Launch the configuration/monitoring utility provided by the vendor of the installed WLAN NIC.
2.
Use the utility to make appropriate Operating Mode, SSID and WEP settings.
NOTE:
A client must be in infrastructure mode, so that it can link to an AP.
NOTE:
The SSID of the wireless client computer and the SSID of the AP must be identical. Or, in
case the SSID broadcasts capability of the AP is enabled (by default), the SSID of the wireless client
computer could be set to “any”.
computer could be set to “any”.
NOTE:
Both the wireless client computer and the AP must have the same WEP settings for them to
communicate with each other.
2.4.2. Configuring TCP/IP-Related Settings
Use Windows Network Control Panel Applet to change the TCP/IP settings of the client computers,
so that the IP addresses of the client computers and the IP address of the AP are in the same IP subnet.
so that the IP addresses of the client computers and the IP address of the AP are in the same IP subnet.
If a client computer is originally set a static IP address, the user can either change its IP address to
match the IP address of the AP, or select an automatically-obtain-an-IP-address option if there is a
DHCP server on the network.
match the IP address of the AP, or select an automatically-obtain-an-IP-address option if there is a
DHCP server on the network.
NOTE:
For some versions of Windows, the computer needs to be restarted for the changes of TCP/IP
settings to take effect.