Справочник Пользователя для AeroComm Corporation 4424200
3/23/2006
18
4.5.2 Change Channel with Forced Acquisition Sync
The Host issues this command to change the channel of the transceiver and force the transceiver to
actively begin synchronization.
actively begin synchronization.
Host Command:
Byte 1 = CCh
Byte 2 = 02h
Byte 2 = 02h
Byte 3 = RF Channel Number (Hexadecimal)
Transceiver Response:
Byte 1 = CCh
Byte 2 = RF Channel Number (Hexadecimal)
4.5.3 Server/Client
The Host issues this command to change the mode (Server or Client) of the transceiver and can force
the transceiver to actively begin synchronization.
the transceiver to actively begin synchronization.
Host Command:
Byte 1 = CCh
Byte 2 = 03h
Byte 3 = Data1
Byte 3 = Data1
Where:
Data1 =
Data1 =
00 for Server in Normal Operation
01 for Client in Normal Operation
01 for Client in Normal Operation
02 for Server in Acquisition Sync
03 for Client in Acquisition Sync
Transceiver Response:
Byte 1 = CCh
Byte 2 = Firmware Version Number
Byte 3 = Data1
Where:
Data1 = Data1 from Host Command
Data1 = Data1 from Host Command
4.6 B
ROADCAST
M
ODE
The Host issues this command to change the transceiver operation between Addressed Mode and
Broadcast Mode. If addressed mode is selected the transceiver will send all packets to the radio
designated by the Destination Address programmed in the transceiver.
Broadcast Mode. If addressed mode is selected the transceiver will send all packets to the radio
designated by the Destination Address programmed in the transceiver.
Host Command:
Byte 1 = CCh
Byte 2 = 08h
Byte 2 = 08h
Byte 3 = 00 for addressed mode, 01 for broadcast mode
Transceiver Response:
Byte 1 = CCh