Справочник Пользователя для Allied Telesis HDF200 AT-TQ0001

Модели

AT-TQ0001

ETHERNET AND FAST ETHERNET STANDALONE MEDIA CONVERTERS

PCI-BASED MEDIA CONVERTERS

SUBCATEGORY FEATURE

AT-MC13

AT-MC101XL

AT-MC102XL

AT-MC103XL

AT-MC103LH

AT-MC104XL

AT-MC115XL

AT-MC116XL

AT-MC605

AT-MC606

AT-FS201

AT-FS202

AT-PC232/POE

AT-FS232

AT-FS232/1

AT-FS232/2

AT-FS238A/1

AT-FS238B/1

AT-MC102XL-PCI AT-MC102XL-PCIe

PORTS

Port 1

10T

100TX

100FX MMF (SC)

10T or 100TX

100TX

10/100TX

100TX

Port 2

10FL (ST)

100FX (ST)

100FX (SC)

10FL (ST) or

100SX (ST)

10FL (SC) or

100SX (SC)

RJ-11

BNC

100FX (ST)

100FX (SC)

Type

MMF

SMF

MMF

VDSL

MMF

SMF

BiDi - SMF

MMF

IEEE STANDARD

10FL

100FX

100SX

100FX

Tx WAVELENGTH

850 nm

1310 nm

850 nm

1310 nm

1550 nm

1310 nm

Rx WAVELENGTH

850 nm

1310 nm

850 nm

1310 nm

1550 nm

1310 nm

MAX DISTANCE

2 km

15 km

40 km

15 km

2 km

3 km

2 km

15 km

40 km

15 km

2 km

FUNCTIONALITY

Rate and speed

■

MissingLink support

■

Smart MissingLink support

■

Max frame size

9KB

1532 bytes

1916 bytes

1532 bytes

9KB

Diagnostic LEDs

POWER OVER
ETHERNET

IEEE 802.3af Class 3

■

PoE-enabled ports

Max full power ports

Mode

PoE power

15.4W

POWER SUPPLY

PSU type

External

Internal

External

PCI

PCIe

Multi-region

■

Compatible with AT-MCR12

12-slot chassis

■

Compatible with AT-MCR1

1-slot chassis

■

DIMENSIONS

(W x D x H)

10 x 9.5 x 2.5 cm

3.93 x 3.74 x 1 in

10 x 9.5 x 2.5 cm

3.93 x 3.74 x 1 in

10 x 9.5 x 2.5 cm

3.93 x 3.74 x 1 in

10 x 9.5 x 2.5 cm

3.93 x 3.74 x 1 in

10 x 9.5 x 2.5 cm

3.93 x 3.74 x 1 in

10 x 9.5 x 2.5 cm

3.93 x 3.74 x 1 in

10 x 9.5 x 2.5 cm

3.93 x 3.74 x 1 in

10 x 9.5 x 2.5 cm

3.93 x 3.74 x 1 in

10 x 9.5 x 2.5 cm

3.93 x 3.74 x 1 in

10 x 9.5 x 2.5 cm

3.93 x 3.74 x 1 in

10 x 9.5 x 2.5 cm

3.93 x 3.74 x 1 in

10 x 9.5 x 2.5 cm

3.93 x 3.74 x 1 in

15.5 x 13.1 x 4 cm

6.1 x 5.16 x 1.58 in

10 x 9.5 x 2.5 cm

3.93 x 3.74 x 1 in

10 x 9.5 x 2.5 cm

3.93 x 3.74 x 1 in

10 x 9.5 x 2.5 cm

3.93 x 3.74 x 1 in

10 x 9.5 x 2.5 cm

3.93 x 3.74 x 1 in

10 x 9.5 x 2.5 cm

3.93 x 3.74 x 1 in

12.5 x 6.4 cm

4.9 x 2.5 in

12.5 x 6.4 cm

4.9 x 2.5 in

Weight

.3 kg / .66 lb

.75 kg / 1.65 lb

.3 kg / .66 lb

.06 kg / .14 lb

Standalone Media Converters

Allied Telesis media converters enable the connection of disparate cabling types in networks where

many cabling types exist. Network segments may also operate at different speeds and media converters

can be used to convert between speeds. Typically, media converters are used to connect copper and

fiber-optic cabling that coexist in a network. Converters exist in a variety of standalone, multi-port and

modular forms. These different physical forms address the need for different applications and conversion

densities.

MissingLink

™

The Allied Telesis MissingLink feature
enables media converters to pass the link
status of their connections and thereby
trigger corrective action when a problem on
a link is detected.

For example, if the twisted-pair cable to
the 10/100TX port on an Allied Telesis
media converter were to fail, the unit would
respond by dropping the link on the 100FX
fiber-optic port.

Most managed devices, such as switches and
routers, can be configured to take a specific
recovery action in the event of the loss of
connection on a port. In some cases, the
unit can be configured to seek a redundant
path to a disconnected end-node or send
out a trap to a network management
station, and so alert the network
administrator of the problem.

AT-MC115XL / MC116XL

These media converters provide

connectivity at both 10 and 100Mbps,
providing conversion from copper 10T

to fiber 10FL and copper 100TX to

fiber 100SX. Operating at 850 nm

wavelength over multi-mode fiber, the
media converters can operate at up to

2 km at 10Mbps and 300 m at 100Mbps.

The AT-MC115XL supports a fiber

ST connector, and the AT-MC116XL
supports fiber SC.

» Operating Temperature 0° to 50°C

» 10T to 10FL

» 100TX to 100SX

» Multi-mode fiber with ST and SC connector

» Standalone, Rack or DINRAIL mounted

Smart MissingLink

™

The Allied Telesis Smart MissingLink feature
has identical operation to MissingLink, with
the added functionality that the media
converter will also flash the link LED of
the port with the link failure. This aids with
diagnostics, allowing network administrators
to more quickly locate and rectify the fault.

Redundancy

In many cases, Allied Telesis media
converters are critical components in
a network, carrying data between sites
over long distances. It is imperative that all
efforts are taken to ensure reliability of the
network, and thus a network design with
redundancy is mandatory. The components
most likely to fail are the power supplies.
The majority of Allied Telesis media
converters can be deployed with hot-
swappable, hot-removable power supplies
to ensure maximum uptime.

| Allied Telesis Products