Справочник Пользователя для Itron Inc. CAR

Скачать
Страница из 1
Collector Activation 
Radio (CAR)   
Quick Reference Guide   
 
The Collector Activation Radio (CAR) is a 
small handheld device that is used to turn on the 
wireless diagnostic radio in a 100 Series 
collector or repeater.   
To turn on the wireless diagnostic 
radio   
•  Press and release the red button on the 
CAR. One button press, regardless of 
duration, sends one message. 
You must be within 100 feet of the 
collector or repeater. 
 
The wireless activation message is sent within 
four seconds of pressing the button.   
 
 
When the message from the CAR is received, 
the Wi-Fi is enabled and a PC (with the proper 
security settings) may now access the 
collector/repeater with a Web-based session. 
If a PC makes a successful connection within 30 
minutes, the wireless diagnostic mode will 
remain active until the connection has been 
severed.   
If a PC does not connect within 30 minutes, the 
CCU exits the wireless mode. 
Troubleshooting 
If the CCU does not recognize the collector 
activation message, check that it has power and 
is operating. 
If you believe that the CAR is not transmitting 
to the collector/repeater, return the CAR to Itron 
for service. 
Service 
This unit contains a non-serviceable lifetime 
battery. If the unit fails, please return to Itron for 
repair/replacement. 
 
 
Caution Only authorized Itron personnel may open 
this device. Unauthorized access or modifications to 
this device voids the warranty.   
Per FCC rules, unapproved modifications or 
operation beyond or in conflict with these 
instructions for use could void the user’s authority to 
operate the equipment. 
 
 
Compliance 
This device complies with Part 15 of the FCC Rules. Operation is subject to the following 
two conditions:   
 
• 
This device may not cause harmful interference.  
• 
This device must accept any interference that may cause undesirable operation.   
 
This device must be permanently mounted such that it retains a distance of 20 centimeters 
(7.9 inches) from all persons in order to comply with FCC RF exposure levels.   
USA, FCC Class B - Part 15  
 
This equipment has been tested and found to comply with the limits for a Class B digital 
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide 
reasonable protection against harmful interference in a residential installation. This 
equipment generates, uses, and can radiate radio frequency energy and, if not installed and 
used in accordance with the instructions, may cause harmful interference to radio 
communications. However, there is no guarantee that interference will not occur in a 
particular installation.   
 
If this equipment does cause harmful interference to radio or television reception, which can 
be determined by turning the equipment off and on, the user is encouraged to try to correct 
the interference by one or more of the following measures:   
 
• 
Reorient or relocate the receiving antenna.   
• 
Increase the separation between the equipment and receiver.   
• 
Connect the equipment into an outlet on a circuit different from that to which the 
receiver is connected.   
• 
Consult the dealer or an experienced radio or TV technician for help.   
 
 
 
 
   TDC-xxxx-000  08 March 2010 
Itron is a registered trademark of Itron, Inc. © 2011 Itron, Inc. All rights reserved.   
 
COPYRIGHT NOTICE   
Your company has the right to reproduce this contract document provided that such 
reproduction shall be subject to the same use and disclosure restrictions contained in the 
Confidentiality and Non-Disclosure paragraphs in the Sales Contract. 
• 
Mail: Itron, Inc., Attention: Customer Care, 2111 N. Molter Road, Liberty Lake, 
WA 99019   
• 
E-mail: support@itron.com   
• 
Phone: 1-877-487-6602   
• 
www.itron.com   
Compliance Statement Canada   
Déclaration de Conformité   
This device complies with Industry 
Canada licence-exempt RSS 
standard(s). Operation is subject to the 
following two conditions: (1) this device 
may not cause interference, and (2) 
this device must accept any 
interference, including interference 
that may cause undesired operation of 
the device.   
Le présent appareil est conforme aux 
CNR d'Industrie Canada applicables aux 
appareils radio exempts de licence. 
L'exploitation est autorisée aux deux 
conditions suivantes : (1) l'appareil ne doit 
pas produire de brouillage, et (2) 
l'utilisateur de l'appareil doit accepter tout 
brouillage radioélectrique subi, même si le 
brouillage est susceptible d'en 
compromettre le fonctionnement.