Справочник Пользователя для Inkmachines Sweden AB TPS-500
Description
InkMachines
TPS-500
Rev 3.0 / 2018-05-25
5 (27)
Main unit
The Main unit (a.) is equipped with an LCD display that makes it possible to view status and make settings to
connected Powerpacks (f.). Communications between the units are by radio for optimal reliability and
performance. The
connected Powerpacks (f.). Communications between the units are by radio for optimal reliability and
performance. The
TPS-500
can handle up to 6 active Powerpacks and charge 2.
The Main unit is also equipped with regular ¼" Phono plugs and can handle other tattoo machines and foot
switches by wire for full compatibility. There is also a USB connection for future software upgrades and for
connection of the Neorail.
switches by wire for full compatibility. There is also a USB connection for future software upgrades and for
connection of the Neorail.
The USB cable (c.) should ONLY be used for software upgrades to the Main unit.
The main unit is not equipped with any power switch, instead the sleep mode is automatic activated if the unit
is not touched for a few minutes. This will put the unit in standby mode. Sleep mode will dim the display and
use less power. If there is Powerpacks in the charger they will go on charging. The sleep mode will also pause
the total time when activated. To deactivate just tilt the tattoo machine, push a button or the footswitch.
is not touched for a few minutes. This will put the unit in standby mode. Sleep mode will dim the display and
use less power. If there is Powerpacks in the charger they will go on charging. The sleep mode will also pause
the total time when activated. To deactivate just tilt the tattoo machine, push a button or the footswitch.
User interface
– Control panel and Display
The User interface gives you the possibility to control the voltage and the settings, and to view time left and
status of the active Powerpack. The User interface is equipped with a Display and a Control panel. The Display
will show the status of the Active Powerpack and the Control panel will make it possible to choose different
selections and change settings.
status of the active Powerpack. The User interface is equipped with a Display and a Control panel. The Display
will show the status of the Active Powerpack and the Control panel will make it possible to choose different
selections and change settings.
All the touching normally takes place on the Control panel during the session - for the hygienic barrier, see
Cleaning and hygienic on page 25. There is normally no need to touch the Powerpacks during session.
Cleaning and hygienic on page 25. There is normally no need to touch the Powerpacks during session.
Powerpack
The battery packs or Powerpacks (f.) are made with leading edge battery technology weighing only 70 grams
each. The normal RCA or clip cord from the machine to the floor weighs about 50 grams, so the actual weight
difference from a normal corded setup is about 20 grams.
each. The normal RCA or clip cord from the machine to the floor weighs about 50 grams, so the actual weight
difference from a normal corded setup is about 20 grams.
The Powerpacks are designed to avoid interfere with the hand as little as possible. The high capacity batteries
allow about 5 hours of effective running under normal circumstances (the time can vary depending on setup).
allow about 5 hours of effective running under normal circumstances (the time can vary depending on setup).
Note! The Powerpack batteries will not take damage from constant charging or irregular charging cycles.
Store the Powerpacks in the charger when not used.
Foot switch
The simple round design makes it easy to activate from all angles the electronics is designed with a magnetic
switch which ensures optimal service life. Standard changeable button cell battery easy to replace by user, see
Exchange of foot switch battery on page 27. The Foot switch (d.) communicates with the Main unit by radio for
optimal reliability and performance.
switch which ensures optimal service life. Standard changeable button cell battery easy to replace by user, see
Exchange of foot switch battery on page 27. The Foot switch (d.) communicates with the Main unit by radio for
optimal reliability and performance.
Neorail
The Neorail (g.) should be used together with the supplied stand (h.) and USB cable (i.).
It is made to handle tattoo needles of type Neo-Cartridges. Neorail can handle up to six Neo-
Cartridges. The Neo-Cartridges are held magnetically to the Neorail which makes it both hygenic and
easy to work with. When used, it takes over the setting of voltage from the Powerpack(s) and each
Neo-Cartridge have their own setting of voltage. Only one Neo-Cartridge can be used at a time and the
rest should remain on the Neorail when working.
At every needle position on the Neorail there is a LED light. This light will change color depending on if
the Neo-Cartridge is in place or not. White is working light, blue indicates that a Neo-Cartridge is in
place and red indicates position for the Neo-Cartridge which is currently active.
It is made to handle tattoo needles of type Neo-Cartridges. Neorail can handle up to six Neo-
Cartridges. The Neo-Cartridges are held magnetically to the Neorail which makes it both hygenic and
easy to work with. When used, it takes over the setting of voltage from the Powerpack(s) and each
Neo-Cartridge have their own setting of voltage. Only one Neo-Cartridge can be used at a time and the
rest should remain on the Neorail when working.
At every needle position on the Neorail there is a LED light. This light will change color depending on if
the Neo-Cartridge is in place or not. White is working light, blue indicates that a Neo-Cartridge is in
place and red indicates position for the Neo-Cartridge which is currently active.