Справочник Пользователя для TP-LINK TD-W8961NB
TD-W8961NB
300Mbps Wireless N ADSL2+ Modem Router User Guide
27
between computers that request IP addresses and the DHCP server that assigns the
addresses. Each of the device's interfaces can be configured as a DHCP relay. If it is enabled,
the DHCP requests from local PCs will forward to the DHCP server runs on WAN side. To
have this function working properly, please run on router mode only, disable the DHCP server
on the LAN port, and make sure the routing table has the correct routing entry.
addresses. Each of the device's interfaces can be configured as a DHCP relay. If it is enabled,
the DHCP requests from local PCs will forward to the DHCP server runs on WAN side. To
have this function working properly, please run on router mode only, disable the DHCP server
on the LAN port, and make sure the routing table has the correct routing entry.
Figure 4-13
•
DHCP Server IP for Relay Age
DHCP server IP Address runs on WAN
)
t Disabled, the DHCP function will not take effect.
4.3.3 Wireless
etup→Wireless” menu, and you will see the Wireless screen (shown in
nt: Enter the
side.
Note:
If you selec
Choose “Interface S
Figure 4-14 ). Please configure the parameters for wireless according to the descriptions below.