Справочник Пользователя для Panasonic CU-2E15GBE
62
Fig. 1
Fig. 2
Fig. 3
Fig. 4
16.2 Indoor Unit
(CS-E18GKEW, CS-E18GKDW)
16.2.1 To Remove the Front Grille
• Lift to open the vertical vent gently. Remove the 3 caps and 3 screws at
the bottom of discharge vent. (Fig. 1)
• Remove the Front Grille by releasing the 3 hooks at the top of the Front
Grille. Hold both sides of the Front Grille and remove it by pulling up
and towards you gently. (Fig. 1)
and towards you gently. (Fig. 1)
• Unhook the tabs at the Control Board to remove the Control Board
Cover. (Fig 2)
• Release the Particular Piece. (Fig. 2)
16.2.2 To Remove the Main Electronic Controller
• Release the 2 screws for the earth wire. (Fig. 3)
• Pull out 2 terminal wires (Red and Black) from the Terminal Board. (Fig.
3)
• Detach the connector Indicator and release the Indicator. (Fig. 3)
• Release the 2 Particular Piece. (Fig. 3)
• Release the screw Holder Terminal Board. (Fig. 3)
• Release the 2 Connector E-Ion. (Fig. 3)
• Release the hooks that hold the Main Electronic Controller and pull out
the Main Electronic Controller. (Fig. 4)