Техническая Спецификация для Aruba IAP-93
Aruba 90 Series Access Points
Aruba Data Sheet
•
Available channels: Dependent upon configured regulatory domain
•
Controller-managed, dependent upon configured
regulatory domain
regulatory domain
•
Dynamic frequency selection (DFS) optimizes the use of
available RF spectrum
available RF spectrum
•
Supported radio technologies:
-
802.11b: Direct-sequence spread-spectrum (DSSS)
-
802.11a/g/n: Orthogonal frequency division multiplexing (OFDM)
-
802.11n: 2x2 MIMO with two spatial streams
•
Supported modulation types:
-
802.11b: BPSK, QPSK, CCK
-
802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM
•
Transmit power: Configurable in increments of 0.5 dBm
•
Maximum transmit power:
-
2.4 GHz: 21 dBm (limited by local regulatory requirements)
-
5 GHz: 21 dBm (limited by local regulatory requirements)
•
Maximum ratio combining (MRC) for improved receiver
performance
performance
•
Cyclic delay diversity for improved downlink RF performance
•
Space-Time Block Coding (STBC) for increased range and
improved reception
improved reception
•
Association rates (Mbps):
-
802.11b: 1, 2, 5.5, 11
-
802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54
-
802.11n: MCS0 to MCS15 (6.5 Mbps to 300 Mbps)
•
802.11n high-throughput (HT) support: HT 20/40
•
802.11n packet aggregation: A-MPDU, A-MSDU
POWER
•
48 volts DC 802.3af power over Ethernet (PoE)
•
12 volts DC for external AC supplied power (adapter
sold separately)
sold separately)
•
Maximum power consumption (worst case):
-
When powered from PoE: 8 watts
-
When powered from DC: 7 watts
ANTENNA
•
AP-92 and IAP-92: Two RP-SMA connectors for
external antennas
external antennas
•
AP-93 and IAP-93: Two integrated omni-directional antennas
for 2x2 MIMO with maximum antenna gain of 2.5 dBi in 2.4 GHz
and 5.8 dBi in 5 GHz
for 2x2 MIMO with maximum antenna gain of 2.5 dBi in 2.4 GHz
and 5.8 dBi in 5 GHz
INTERFACES
•
Network: One 10/100/1000BASE-T Ethernet (RJ-45),
auto-sensing link speed and MDI/MDX
auto-sensing link speed and MDI/MDX
•
Power: One DC power connector
•
Other: One RJ-45 console interface
MOUNTING
•
Included with AP:
-
Molded mounting tabs for attaching to 15/16” T-bar
drop-tile ceiling
drop-tile ceiling
-
Slotted tabs for screw mounting to a wall, ceiling or other
flat surface
flat surface
•
Optional AP-90-MNT mounting kit:
-
Aruba 90 series AP mount kit contains two ceiling-grid rail
adapters for 9/16” and 15/16” flat rails, and one flat-surface
wall/ceiling mount bracket.
adapters for 9/16” and 15/16” flat rails, and one flat-surface
wall/ceiling mount bracket.
MECHANICAL
•
Dimensions/weight (unit):
-
120 mm x 130 mm x 35 mm (4.7” x 5.1” x 1.4“)
-
255 g (9 oz)
•
Dimensions/weight (shipping):
-
180 mm x 155 mm x 45 mm (7.1” x 6.1” x 1.8”)
-
375 g (13.2 oz)
ENVIRONMENTAL
•
Operating:
-
Temperature: 0° C to 50° C (+32° F to +122° F)
-
Humidity: 5% to 95% non-condensing
•
Storage and transportation temperature range:
-
Temperature: -40° C to +70° C (-40° F to +158° F)
REGULATORY
•
FCC/Industry of Canada
•
CE Marked
•
R&TTE Directive 1995/5/EC
•
Low Voltage Directive 72/23/EEC
•
EN 300 328
•
EN 301 489
•
EN 301 893
•
UL/IEC/EN 60950
•
EN 60601-1-1, EN60601-1-2
For more country-specific regulatory information and approvals,
please see your Aruba representative.
please see your Aruba representative.
CERTIFICATIONS
•
CB Scheme Safety, cTUVus
•
UL2043 plenum rating
•
Wi-Fi certified 802.11a/b/g/n
WARRANTY
•
MINIMUM ARUBAOS VERSION
•
ArubaOS 5.0.4.2, 6.0.2.1, 6.1.2.0 on an Aruba
Mobility Controller
Mobility Controller
•
Aruba Instant 2.0.0.3 software