Справочник Пользователя для Nokia E90 E90ZWA
Модели
E90ZWA
To disable the sending of audio, video, or video and audio, select
Options
>
Disable
>
Sending audio
,
Sending video
, or
Sending
aud. & video
.
To use the loudspeaker for receiving audio, select
Options
>
Activate loudspeaker
. To mute the loudspeaker and use the
earpiece, select
Options
>
Activate handset
.
To swap the places of images, select
Options
>
Change image order
.
To zoom the image on the display, select
Options
>
Zoom in
or
Zoom out
.
To end the video call and make a new voice call to the same recipient, select
Options
>
Switch to voice call
.
Video sharing
To share videos (network service) during a voice call, you need to configure the session initiation protocol settings at >
Tools
>
Settings
>
Connection
>
SIP settings
. Contact your service provider for the correct settings.
You also need to set the network mode to
UMTS
at >
Tools
>
Settings
>
Phone
>
Network
.
Share a video
1. Make a phone call to the selected recipient. The recipient needs to have a compatible phone. You can start sharing a video
once the phone call is established and your device has been registered to the SIP server.
2. To send live video or a video clip from your device, select
Options
>
Share video
>
Live video
or
Recorded clip
. To preview
the clip, select
Options
>
Play
.
3. Select the recipient from Contacts, or enter the recipient's phone number or SIP address manually to send an invitation to
the recipient. Sharing begins automatically when the recipient accepts the video sharing.
4. To end sharing the video, select
Stop
. The voice call continues normally.
Receive a video sharing invitation
When you receive a video sharing invitation, a message is displayed showing the caller’s name or SIP address.
To accept the invitation and begin the sharing session, select
To accept the invitation and begin the sharing session, select
Accept
.
To reject the invitation, select
Reject
. The voice call continues normally.
Net calls
Your device supports voice calls over the internet (net calls). Your device attempts emergency calls primarily over cellular
networks. If an emergency call using cellular networks is not successful, your device attempts an emergency call through your
net call provider. Due to the established nature of cellular telephony, you should use cellular networks for emergency calls, if
possible. If you have cellular network coverage available, make sure that your cellular phone is switched on and ready to make
calls before you attempt an emergency call. The capability for an emergency call using internet telephony depends on the
availability of a WLAN network and your net call provider's implementation of emergency call capabilities. Contact your net call
provider to check the internet telephony emergency call capability.
Select >
Select >
Connectivity
>
Internet tel.
.
With the net call service (network service), you can make and receive calls over the internet using the VoIP (voice over internet
protocol) technology. Net calls can be established between computers, between mobile phones, and between a VoIP device and
a traditional telephone. To make or receive a net call, your device must be within WLAN coverage, for example.
The availability of the net call service may vary according to your country or area.
The availability of the net call service may vary according to your country or area.
Create a net call profile
Before you can make net calls, you need to create a net call profile.
1. Select >
1. Select >
Tools
>
Settings
>
Connection
>
SIP settings
>
Options
>
New SIP profile
, and enter the required information.
Ensure that
Registration
is set to
Always on
. Contact your net call provider for the correct settings.
2. Select
Proxy server
>
Transport type
>
Auto
.
3. Select
Back
until you return to the
Connection
settings main view.
4. Select
Internet tel.
>
Options
>
New profile
. Enter a name for the profile, and select the SIP profile you just created.
To set the created profile to be used when connecting to the net call service automatically, select >
Connectivity
>
Internet
tel.
>
Preferred profile
.
To login to the net call service manually, select
Registration
>
When needed
, and
Transport type
>
UDP
or
TCP
in the SIP settings
when creating a net call profile.
T e l e p h o n e
© 2007 Nokia. All rights reserved.
22