Справочник Пользователя для TE Connectivity 1375055-7
Category 6 SL Series Modular Jacks
1375055-X, 1375187-X, 1375188-1
TE Connectivity's Category 6 SL series modular jacks exceed ANSI/TIA-568-C.2
and ISO/IEC 11801 component requirements and Category 6/Class E system
performance. TE's Category 6 System complies with all of the performance
requirements for current and proposed applications such as Gigabit Ethernet
(1000BASE-TX), 10 and 1 OOBASE-TX, loken ring , 155 Mbps ATM, 100 Mbps
TP-PMD, ISDN, analog and digital video, and analog and digital voice (VoIP).
and ISO/IEC 11801 component requirements and Category 6/Class E system
performance. TE's Category 6 System complies with all of the performance
requirements for current and proposed applications such as Gigabit Ethernet
(1000BASE-TX), 10 and 1 OOBASE-TX, loken ring , 155 Mbps ATM, 100 Mbps
TP-PMD, ISDN, analog and digital video, and analog and digital voice (VoIP).
TE's Category 6 SL Series Modular Jacks have a slim profile and are compatible
with SL Series and 11OConnecl faceplates. Universal wiring labels permit
termination to either T568A or T5688 wiring patterns. Modular jack are available
in shielded and unshielded options. The unshielded jacks offer an optional integral
dust cover. Unshielded jacks allow cables to be dressed at either 180° (rear) or 90°
(either side) for added flexibility. Patented bend-limiting strain relief may also be
used to reduce stress on cable at point of termination and is included with each
unshielded modular jack. SL Series Modular Jacks are available in almond, black,
gray, orange, blue, red, yellow, green, violet, electrical ivory and alpine white (see
part number table for color samples).
with SL Series and 11OConnecl faceplates. Universal wiring labels permit
termination to either T568A or T5688 wiring patterns. Modular jack are available
in shielded and unshielded options. The unshielded jacks offer an optional integral
dust cover. Unshielded jacks allow cables to be dressed at either 180° (rear) or 90°
(either side) for added flexibility. Patented bend-limiting strain relief may also be
used to reduce stress on cable at point of termination and is included with each
unshielded modular jack. SL Series Modular Jacks are available in almond, black,
gray, orange, blue, red, yellow, green, violet, electrical ivory and alpine white (see
part number table for color samples).
SPECIFICATION (TEXT IN BRACKETS [] REQUIRES A CHOICE)
Modular jacks shall be unkeyed,
[unshielded or shielded], 4-pair, RJ-45, and shall
fit in a .790" X .582" opening. Modular jacks shall terminate using 11O-style pc
board connectors, color-coded for both T568A and T5688 wiring. Each modular
jack shall be wired to
board connectors, color-coded for both T568A and T5688 wiring. Each modular
jack shall be wired to
[T568A or T568B]. The 11O-style insulation displacement
connectors shall be capable of terminating 22-24 AWG solid or 24 - 26 AWG
stranded conductors. The insulation displacement contacts shall be paired, with
additional space between pairs, to improve crosstalk performance. Modular jacks
shall utilize a secondary PC board, separate from the signal path, for crosstalk
compensation. Earn modular jack shall meet the
stranded conductors. The insulation displacement contacts shall be paired, with
additional space between pairs, to improve crosstalk performance. Modular jacks
shall utilize a secondary PC board, separate from the signal path, for crosstalk
compensation. Earn modular jack shall meet the
[ANSI/TIA-568-C.2 and ISO/
IEC 11801 component requirements and Category 6/Class E system] performance
standards and the requirements listed in the following table.
standards and the requirements listed in the following table.
[Include Performance Characteristics table from page 2]
Modular Jacks shall be compatible with TE SL Series termination tool part number
1725150-1. Each unshielded modular jack shall be provided with a bend-limiting
strain relief. The strain relief shall provide cylindrical support to limit the bend
radius at the point of termination. [
1725150-1. Each unshielded modular jack shall be provided with a bend-limiting
strain relief. The strain relief shall provide cylindrical support to limit the bend
radius at the point of termination. [
Each jack shall incorporate an integral, hinged
dust cover]. Modular jacks shall be UL listed under file number E81956. Modular
jacks shall be TE part number [
jacks shall be TE part number [
1375055-X, 1375187-X or 1375188-1 (X denotes
color, see part number table)) and be [
almond, black, gray, orange, blue, red,
yellow, green, violet, electrical ivory or alpine white] in color.
.64
1.20
.57
.64
1.20
.57
.64
1.20
.57