Справочник Пользователя для Eurolite Halogen PAR stage spotlight 42000825

PAR_56_SHORT_V_1_0.DOC

16/31

The spot may only be operated when in accordance with the allowable position for use. Please ensure, that
the angle of inclination is set within the following parameters:

Adjust the desired inclination-angle via the mounting-bracket and tighten the fixation screws.

Connect the device to the mains with the power-plug.

Brown

Live

L

Blue

Neutral

N

Yellow/Green

Earth

The earth has to be connected!

If the device will be directly connected with the local power supply network, a disconnection switch with a
minimum opening of 3 mm at every pole has to be included in the permanent electrical installation.

DANGER TO LIFE!

After you connected the spot to the mains, you can control the spots via your lighting controller.

The operator has to make sure that safety-relating and machine-technical installations are inspected by an
expert after every four years in the course of an acceptance test.

The operator has to make sure that safety-relating and machine-technical installations are inspected by a
skilled person once a year.

The following points have to be considered during the inspection:
1)  All screws used for installing the devices or parts of the device have to be tighly connected and must not

be corroded.

2)  There must not be any deformations on housings, fixations and installation spots (ceiling, suspension,

trussing).

3)  The electric power supply cables must not show any damages, material fatigue (e.g. porous cables) or

sediments. Further instructions depending on the installation spot and usage have to be adhered by a
skilled installer and any safety problems have to be removed.