Техническая Спецификация для Kingston Technology 1GB 800MHz DDR2 Non-ECC CL6 SODIMM (Kit of 2) KVR800D2S6K2/1G
Модели
KVR800D2S6K2/1G
Memory Module Specification
DESCRIPTION:
ValueRAM's KVR800D2S6K2/1G is a kit of two 64M x 64-bit (512MB) DDR2-800 CL6
SDRAM (Synchronous DRAM) memory modules. Total kit capacity is 1GB (1024MB). The
components on each module include eight 64M x 8-bit DDR2-800 SDRAM in FBGA packages.
Each 200-pin SODIMM uses gold contact fingers and requires +1.8V. The electrical and
mechanical specifications are as follows:
SDRAM (Synchronous DRAM) memory modules. Total kit capacity is 1GB (1024MB). The
components on each module include eight 64M x 8-bit DDR2-800 SDRAM in FBGA packages.
Each 200-pin SODIMM uses gold contact fingers and requires +1.8V. The electrical and
mechanical specifications are as follows:
FEATURES:
Clock Cycle Time (tCK) CL=6
2.5ns (min.) / 8ns (max.)
Row Cycle Time (t
RC
)
60ns (min.)
Refresh to Active/Refresh Command Time (tRFC)
105ns
Row Active Time (tRAS)
45ns (min.) / 70,000ns (max.)
Single Power Supply of
+1.8V (+/- .1V)
Power
1.224 W (operating per module)
UL Rating
94 V - 0
Document No. VALUERAM0601-001.B00
02/18/09
Figure 1: KVR800D2S6K2/1G 200-Pin SODIMM
KVR800D2S6K2/1G
1GB (512MB 64M x 64-Bit x 2 pcs.) DDR2-800
CL6 200-Pin SODIMM Kit
Note: The module defined in this data sheet is one of several configurations available under this part number. While
all configurations are compatible, the DRAM combination and/or the module height may vary from what is described
here. However, in no configuration will the module height exceed 30mm.
all configurations are compatible, the DRAM combination and/or the module height may vary from what is described
here. However, in no configuration will the module height exceed 30mm.
(units = millimeters)