Листовка для Moxa EtherDevice™ Switch, EDS-405A, Multi Mode, SC Connector x 2, (-40 to 75˚C) EDS-405A-MM-SC-T

Модели
EDS-405A-MM-SC-T
Скачать
Страница из 2
email: info@moxa.com     www.moxa.com         
3
3-29
Industrial Networking Solutions
Industrial Ethernet Infrastructure
  >
EDS-405A/408A Series
5 and 8-port entry-level managed Ethernet switches
The certifi cation logos shown here apply to some or all of the products in this 
section. Please see the Specifi cations section or Moxa’s website for details.
100BaseFX
Multi Mode
Single Mode
Single Mode, 
80 km
Wavelength
1300 nm
1310 nm
1550 nm
Max. TX
-10 dBm
0 dBm
0 dBm
Min. TX
-20 dBm
-5 dBm
-5 dBm
RX Sensitivity
-32 dBm
-34 dBm
-34 dBm
Link Budget
12 dB
29 dB
29 dB
Typical Distance
5 km 
a
4 km 
b
40 km 
c
80 km 
d
Saturation
-6 dBm
-3 dBm
-3 dBm
a. 50/125 μm, 800 MHz*km fi ber optic cable
b. 62.5/125 μm, 500 MHz*km fi ber optic cable
c. 9/125 μm, 3.5 PS/(nm*km) fi ber optic cable
d. 9/125 μm, 19 PS/(nm*km) fi ber optic cable 
 
 
EDS-405A/408A Series
Features and Benefi ts
Plug-n-Play Turbo Ring (recovery time < 20 ms at full load) and 
RSTP/STP (IEEE 802.1w/D) capability
Port-based VLAN to ease network planning
QoS-IEEE 802.1p and TOS/DiffServ to increase determinism
RMON for effi cient network monitoring and proactive capability
Introduction
The EDS-405A/408A series switches are entry-level 5 and 8-port 
managed Ethernet switches designed especially for industrial 
applications. The switches support a variety of useful management 
functions, such as Turbo Ring, ring coupling, port-based VLAN, QoS, 
RMON, bandwidth management, port mirroring, and warning by email 
or relay. The ready-to-use Turbo Ring can be set up easily using the 
web-based management interface, or with the DIP switches on the 
switch’s top panel.
Technology
Standards: IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X) and 100Base FX,
IEEE 802.3x for Flow Control,
IEEE 802.1D for Spanning Tree Protocol,
IEEE 802.1w for Rapid STP,
IEEE 802.1p for Class of Service
Protocols: SNMP V1/V2c/V3, DHCP Server/Client, DHCP Option 82, 
BootP, TFTP, SNTP, SMTP, RARP, LACP, RMON 
MIB: MIB-II, Ethernet-Like MIB, P-BRIDGE MIB, Bridge MIB, RSTP 
MIB, RMON Group 1, 2, 3, 9
Flow Control: IEEE 802.3x flow control, back pressure flow control
Interface
RJ45 Ports: 10/100BaseT(X) auto negotiation speed, F/H duplex mode, 
and auto MDI/MDI-X connection
Fiber Ports: 100BaseFX ports (SC/ST connector) 
 
Console: RS-232 (RJ45)
LED Indicators: PWR1, PWR2, FAULT, MASTER, COUPLER, 10/100M
DIP Switches: Turbo Ring, Master, Coupler, Reserve
Alarm Contact: One relay output with current carrying capacity of 1A 
@ 24 VDC
Optical Fiber
Power Requirements
Input Voltage: 24 VDC (12 to 45 VDC), redundant dual inputs
Input Current (@ 24 V): 0.26A/0.24A (EDS-405A/408A), 0.35A/0.32A 
(EDS-405A/408A-MM, -SS)
Connection: One removable 6-pin terminal block
Overload Current Protection: Present
Reverse Polarity Protection: Present
Specifi cations
Plug-n-Play Turbo Ring with fast recovery time within 20 ms
 
QoS, port-based VLAN, SNMP V1/V2c/V3, RMON supported
 
Automatic warning by exception through e-mail, relay output
 
User-friendly web-based confi guration and management
 
ABC-01 (Automatic Backup Confi gurator) for system confi guration 
 
backup
SNMP V1/V2c/V3 for different levels of network management  
security
Bandwidth management prevents unpredictable network status
Port mirroring for online debugging
Automatic warning by exception through e-mail and relay output