Техническая Спецификация для Meilhaus Electronic Mile House El.MML USB MEAS/switch RedLab® 1008
Модели
RedLab® 1008
miniLAB 1008 User's Guide
Specifications
Non-volatile Memory
Memory size
8192 bytes
Address Range
Access
Description
0x0000 – 0x17FF
Read/Write
A/D data (4 k samples)
0x1800 – 0x1EFF
Read/Write
User data area
0x1F00 – 0x1FEF
Read/Write
Calibration data
Memory configuration
0x1FF0 – 0x1FFF
Read/Write
System data
Power
Parameter Conditions
Specification
Supply current (Note 5)
20 mA
Connected to Self-Powered Hub
4.5 V min, 5.25 V max
+5 V USB power available
(Note 6)
(Note 6)
Connected to Bus-Powered Hub
4.1 V min, 5.25 V max
Connected to Self-Powered Hub
450 mA min, 500 mA max
Output current (Note 7)
Connected to Bus-Powered Hub
50 mA min, 100 mA max
Note 5:
Note 6:
Note 7:
This is the total current requirement for the miniLAB-1008 which includes up
to 5 mA for the status LED.
to 5 mA for the status LED.
Self-powered refers to USB hubs and hosts with a power supply. Bus-powered
refers to USB hubs and hosts without their own power supply.
refers to USB hubs and hosts without their own power supply.
This refers to the total amount of current that can be sourced from the USB
+5 V, analog outputs and digital outputs.
+5 V, analog outputs and digital outputs.
General
Parameter Conditions
Specification
25 °C
±30 ppm max
0 to 70 °C
±50 ppm max
USB Controller clock error
-40 to 85 °C
±100 ppm max
Device type
USB 1.1 low-speed
Device compatibility
USB 1.1, USB 2.0
Environmental
Operating temperature range
-40 to 85 °C
Storage temperature range
-40 to 85 °C
Humidity
0 to 90% non-condensing
6-5