Справочник Пользователя для Friedland D915S Wireless Bell 200005

.

Unpack your chime kit and identify the 
following parts:

¬

●

Chime

● 

Chime bracket

● 

Bell push/converter

● 

CR2032 battery for bell push

● 

2 x fixing screws for push

● 

Bell wire (for use with a wired push)

● 

2 x fixing screws for chime

● 

2 x wall plugs

● 

Adhesive pad

●

A 4mm cross-head screwdriver 

● 

A small flat bladed screwdriver

● 

A 6mm masonry drill

● 

4 x LR14 ’C’ Alkaline batteries

Before proceeding with the installation, 
please note the following safety warnings:

¬

●

Always follow the manufacturer’s advice 

when using power tools and wear suitable
protective equipment (e.g. safety goggles)
when drilling holes etc.

¬

●

Before drilling holes in walls, check for 
hidden electricity cables and water pipes, 
the use of a cable/pipe locater maybe 
advisable if in doubt.

¬

● 

When connecting the landscape

push/converter to other manufacturers’
equipment, check manuals and if necessary 
consult the manufacturer regarding suitability 
for the intended use.

The bell push supplied with this kit is pre-programmed to operate with the chime. You need to do the following to get started:

●

Open the bell push

●

Fit the push battery 

●

Fit the chime batteries 

●

Check the chime switch setting

●

Check the volume setting

When you operate the bell push, the chime will sound and the 1st Icon will flash. If you have additional 
pushes or you want to assign a different icon to your push, you will need to follow the programming procedure.

2