Техническая Спецификация для Futaba Hendheld RC 2.4 GHz No. of channels: 14 1-F8075
Модели
1-F8075
17
<Before Use>
Note:
*Scroll operation: Circle your finger on the outside edge of
the RTN button. The sensors may mis-read your touch as a
reverse rotation if the circle is smaller, or performed on the
inside edge of the RTN button.
* The SensorTouch™ may not operate smoothly if your
hand is touching the surrounding case parts. Please make
sure that the tip of your finger is actually operating the
SensorTouch™.
*If the SensorTouch™ does not register your input, please
try again after lightly tapping your finger on the sensor once
again.
* Do not operate the SensorTouch™ while wearing gloves.
The SensorTouch™ may not work correctly.
Caution
The touch sensor may not operate correctly
if spark noise is generated from a gasoline
engine, etc. Please remove the transmitter to
a location away from the noise source.
Stick Adjustment
Adjustment of the stick lever length
Adjustment of the stick lever length
You can adjust the length of stick levers, as you
like. It is recommended to adjust the length of the
sticks in line with your hand size.
1. Hold the lever head "B" and turn the lever
head "A" counter-clockwise. The lock will be
released.
2. Turn the lever-head "A" clockwise as you hold
the lever-head "B" after placing it as you like.
A
Lever Head
B
Lever Head
Adjustment of stick lever tension
The tension of the self-return type stick lever can
be adjusted.
1. First, Remove the battery cover on the
bottom of the transmitter. Next, unplug the
battery wire and remove the battery from the
transmitter.
2. Next, using a hand, remove the transmitter's
side cover (rubber). When using Mode 1, you
will need to remove the side cover to expose
the tension screw.
3. Using your hand remove the transmitters rear
rubber grips.
• Side Cover
• It is only the mode 1
•Rear Grip
•Rear Grip