Техническая Спецификация для Futaba Hendheld RC 2.4 GHz No. of channels: 14 1-F8075

S.BUS/S.BUS2 servos or a telemetry sensor can be connected directly to the T14SG. Channel setting and 

other data can be entered for the S.BUS/S.BUS2 servos or sensors. 

3-way hub 
or Y-harnesses

(S.BUS/S.BUS2  

Servo)

S.BUS/S.BUS2 

device

(Telemetry sensor)

Receivers

Battery

T14SG

1. Connect the S.BUS device and battery you 

want to set with a 3-way hub or Y-harnesses 

as shown in the figure.

2. Turn on the transmitter power.
3. Call the setup screen.
　

Servo: System Menu → S.BUS Servo

　

Sensor: Linkage Menu → Sensor

4. Perform setting in accordance with each 

screen.

5. This sets the channel and other data for each 

S.BUS servo, or telemetry device to be used 

with the S.BUS device or receiver.