Техническое Описание для Behringer Europower PMP2000
behringer.com
2
EUROPOWER PMP2000 User Manual
Specifications
Mono inputs
Microphone inputs
Type
XLR, electronically balanced,
discrete input circuit
discrete input circuit
Mic E.I.N. (20 Hz - 20 kHz)
@ 0 Ω source resistance
-122 dB / 125 dB A-weighted
@ 50 Ω source resistance
-122 dB / 125 dB A-weighted
@ 150 Ω source resistance
-121 dB / 124 dB A-weighted
Frequency response
<10 Hz - 100 kHz (-1 dB),
<10 Hz - >200 kHz (-3 dB)
<10 Hz - >200 kHz (-3 dB)
Gain
+33 dB, +8 dB with pad
Max. input level
+12 dBu @ +8 dB gain
Impedance
approx. 2.2 kΩ balanced / 1.1 kΩ unbalanced
Signal-to-noise ratio
110 dB / 114 dB A-weighted
(-11 dBu In @ +33 dB gain)
(-11 dBu In @ +33 dB gain)
Distortion (THD + N)
0.001% / 0.0008% A-weighted
Mono Line inputs
Type
¼" TRS connector, balanced
Impedance
approx. 80 kΩ balanced, 40 kΩ unbalanced
Max. input level
30 dBu
Stereo Line inputs
Type
¼" TRS connector, unbalanced
Impedance
approx. 40 kΩ unbalanced
Max. input level
+28 dBu
EQ
Low
60 Hz / ±15 dB
Mid
700 Hz/ ±15 dB
High
6 kHz / ±15 dB
Preamp Outputs Left/Mono & Right
Type
¼" TRS connector, unbalanced
Impedance
approx. 1.5 kΩ
Max. output level
+21 dBu
Power Amp inputs
Type
¼" TRS connector, unbalanced
Impedance
approx. 47 kΩ
Max. input level
+21 dBu
Monitor Output
Type
¼" TRS connector, unbalanced
Impedance
1.5 kΩ
Max. output level
+21 dBu
DSP
24-bit Texas Instruments
Converter
24-bit Sigma-Delta,
64/128-times oversampling
64/128-times oversampling
Sampling rate
40 kHz
Main Mix System Data
1
Noise
Main mix @ -∞,
-76 dB / -80 dB A-weighted
Channel fader -∞
Main mix @ 0 dB,
-72 dB / -76 dB A-weighted
Channel fader -∞
Main Mix @ 0 dB,
-71 dB / -75 dB A-weighted
Channel fader @ 0 dB
Power Amp Specifications
RMS @ 1 % THD (sine wave), both channels driven:
8 Ω per channel
165 W
4 Ω per channel
250 W
RMS @ 1 % THD (sine wave), bridged mode:
8 Ω
500 W
Peak Power, both channels driven
8 Ω per channel
225 W
4 Ω per channel
350 W
Peak Power, bridged mode
8 Ω
800 W
Loudspeaker Connections
Loudspeaker connector
Professional speaker con nectors
(compatible to Neutrik Speakon)
(compatible to Neutrik Speakon)
Load impedance
Left/monitor
4/8/16 Ω
Right/mono main
4/8/16 Ω
Bridge
8/16 Ω