Справочник Пользователя для Bunn LCR-3

OPERATING CONTROLS AND INTERFACE

1. Master ON/OFF Switch: Disconnects AC Power to the dispenser.

2. Hot Water Handle: Pull and Hold to dispense hot water manually.

3. Door Interlock Switch: Unit will not dispense product if the door is open.

4. LCD Display: Displays status, programming menus and fault messages.

5. Volume Selection: Rotate dial to the desired volume prior to dispensing product.

6. Dispense Switches (A-B-C): Push and Release to dispense the desired product.

(These also double as programming switches in the Set-Up mode).

7. Function Selector Switch: Allows the user to set the dispenser into different dispensing modes.

a. RINSE: Dispenses hot water only - Flushes the mix chamber and dispense tip.

b. RUN: Normal dispense mode - Dispenses mixed product (concentrate and water).

c. PRIME: Dispenses concentrate only – Primes the concentrate pump.

8. Hidden Set-Up / Programming switches.

a. Press and hold the Right switch for 5 sec. to enter in the Set-Up mode.

b. Use the Right switch to scroll down and the Left switch to scroll up through the menu screens.

41129 052208