Инструкции По Установке для Behringer Guitar Link UCG102

13 GUITAR LINK UCG102 Software Installation Guide
2.4  Troubleshooting

See the list of common problems, and hints on how to resolve them, 
if you encounter any software problems.

USB AUDIO codec not recognized by Windows, 
no entry for USB AUDIO device in Windows 
device manager
•  Check USB connection. If possible, try using a different USB cable 

or USB port

•  Connect UCG102 directly to PC or Laptop, not via a USB hub
•  Ensure that USB port is functional (does it work with digital 

camera, printer, etc.?)

If necessary, check if USB ports are activated in host system BIOS

Windows driver installation not completed 
(eg. Windows error code 10, error code 39) 
•  Check USB connection. If possible, try a different USB cable or 

USB port 

•  Connect UCG102 directly to PC or Laptop, not via a USB hub 
•  If possible, try to install on another PC or Laptop

Installation of BEHRINGER USB AUDIO driver 
failed with “Error 0x0006” 
•  Check USB connection. If possible try using a different USB cable 

or USB port

•  Close the application and re-run “setup.exe“ in the folder 

“ASIO_driver“ on the CD

•  Download up-to-date ASIO driver files from behringer.com

ASIO-USB control panel does not show 
BEHRINGER USB AUDIO as device
•  Check USB connection. If possible, try a different USB cable or 

USB port 

•  Connect UCG102 directly to PC or Laptop, not via a USB hub 
•  Close the application and re-run “setup.exe“ in the folder 

“ASIO_driver“ on the CD

Latency time too long 
1)  Start the ASIO-USB Control Panel from within the audio 

software (may be called ASIO Config or similar).

2)  USB Device = BEHRINGER USB AUDIO.
3)  Click on the ASIO tab.
4)  System Performance = rapid (or even highspeed).