Справочник Пользователя для Worth Data 802 RF

2-8

If you have skipped the above screen and want to get to it, simply the press 
the 

F1 key. 

If your skip the opening screen and you want to check the settings of the 
Terminal without having to reset this parameter, just press the Status Key 
and the terminal will display six lines as follows: 

either shows the Server's fixed TCPIP address; or if 

Device searches out the Server, shows 0.0.0.0. 

either shows the Device's fixed TCPIP address or if it 

is determined by a DHCP Server, shows 0.0.0.0. 

shows the

channel to start using, (the channel of the most 

frequently used Access Point). 

refers to the first 12 characters of the up to 

32 character network

name. 

WEP=128 or 64 or NO 

shows how the Device is configured 

with an encryption key. 

shows the signal strength from the best Access 

Point with the same SSID, (if already SIGNED ON). 

 

Press the 

 key again to resume processing. 

By selecting Speaker in the keyboard Setup Mode, you get to the options to 
control the Speaker/Beeper and Headphone volumes. If you are using 
headphones, you will want set the Speaker volume to 0 to conserve batteries. 
Volume settings possible are 0-9. 

The prompt for Speaker Volume is: