Справочник Пользователя для Worth Data 802 RF

2-15

with the RF Terminal, this will be set to Rechargeable before shipping.  

If you didn't order re-chargeable batteries, this shipped setting is 
Alkaline.  Battery Status can be displayed by pressing the STATUS key 
on the RF Terminal keypad.  

Before you can recharge the batteries, this parameter must be set to 
Rechargeables. Don't try to recharge alkaline batteries. They might 
explode. This will void your warranty. 

If you decide to use rechargeables after ordering the RF Terminal without 
rechargeables included, you must change this setting allow recharging. 

US Format 

0 

European Format 

1 

The US format of 

mm/dd/yy is the default setting.  

If you switch formats, you must reset the date (

SET DATE) in the new 

format also. 

For correct date display, the 6-digit date must be set in the date format you 
plan to use.  By default the US terminals use the US date format of 
dd/mm/yy.  If you change the date format, you must re-set the date to match 
the new format. For example, to set a date of January 20, 1999, you would 
enter 012099 (US format) or 200199 (European format). The date can be 
scanned in from the bar coded Setup Menu or entered from the RF Terminal 
keypad.  To display the date during operation, press the STATUS key. 

The time is set using a 4-digit military 

hhmm format.  For example, to set 

the time to 3:08 p.m., you would enter 

1508. The time can be scanned in 

from the bar coded Setup Menu or entered from the RF Terminal keypad.  
To display the time during operation, press the STATUS key. 

2 digit 

0 

4 digit 

1 

By default, the RF Terminal is configured to display and transmit the 
year in a 

2-digit format; i.e. 2005 would transmit and display as 05. 

Before you change the RF Terminal to display a 4-digit year, i.e. 

2005, 

make sure that the software receiving data from the RF Terminal is set 
up to accept a 4-digit year.