Справочник Пользователя для Stanley Black & Decker CH2
2
STANLEY is a registered trademark of The Stanley Works or its affiliates and are used under license by GXi Outdoor Power LLC.
No part of this publication can be printed or copied without written permission.
Rev2.5-15-12
Training
1. Read, understand, and follow all instructions on the machine and
in the manual before attempting to assemble and operate. Keep
this manual in a safe place for future and regular reference and
for ordering replacement parts.
this manual in a safe place for future and regular reference and
for ordering replacement parts.
2. Be familiar with all controls and their proper operation. Know
how to stop the machine and disengage controls quickly.
3. Never allow children under 18 years old to operate this machine.
Children 18 years old and over should read and understand the
operation instructions and safety rules in this manual and should
be trained and supervised by a parent.
operation instructions and safety rules in this manual and should
be trained and supervised by a parent.
4. Never allow adults to operate this machine without proper
instruction.
5. Keep bystanders, helpers, pets, and children at least 75 feet from
the machine while it is in operation. Stop machine if anyone
enters the area.
enters the area.
6. Never run an engine indoors or in a poorly ventilated area. Engine
exhaust contains carbon monoxide, an odorless and deadly gas.
7. Do not put hands or feet near rotating parts or in the feeding
chambers and discharge opening. Contact with the rotating
impeller can amputate fingers, hands, and feet.
impeller can amputate fingers, hands, and feet.
8. Never attempt to unclog either the feed intake or discharge
opening, or inspect and repair the machine while the engine is
running. Shut the engine off and wait until all moving parts have
come to a complete stop. Disconnect the spark plug wire and
ground it against the engine.
running. Shut the engine off and wait until all moving parts have
come to a complete stop. Disconnect the spark plug wire and
ground it against the engine.
Chipper/Shredder Model # Specifications
Model #
CH2
CH7
Maximum RPM
3600 RPM
3600 RPM
Torque
8 Ft Lbs
12 Ft Lbs
Emission Compliance
48 state
48 state
Fuel Capacity (gal.)
0.9
1.3
Engine Type
DEK
DEK
Displacement (cc)
208 cc
270 cc
Chipper
Yes
Yes
Shredder Yes
Yes
Maximum Cutting
Thickness Diameter (in.)
Thickness Diameter (in.)
2.25” 3”
Oil Capacity (Qts)
0.6
1.1
Product Specifications
NOTE:
The operator or user
is responsible for
accidents or hazards
occurring to other
people, their
property, and
themselves.
Warnings