Справочник Пользователя для VIZIO TL-R480T

 

 - The general firewall switch is on or off. 

 

  - Set IP Address Filtering is enabled or disabled. 

There are two default filtering rules of IP Address Filtering, either Allow or Reny 
passing through the router. 

 

 - Set Domain Filtering as enabled or disabled. 

 

 - Set MAC Address Filtering is enabled or disabled. You can 

select the default filtering rules of MAC Address Filtering, either Allow or Reny 
accessing the router. 

The IP Address Filtering feature allows you to control Internet Access by specific users 
on your LAN based on their IP addresses. The IP Address Filtering are set on this page, 
figure 5-23: 

 

Figure 5-23  IP Address Filtering 

To disable the IP Address Filtering feature, keep the default setting, Disabled. To set up 
an IP Address Filtering entry, click Enable Firewall and Enable IP Address Filtering on 
the Firewall page, and click the Add New… button. The page " Add or Modify an IP 
Address Filtering entry

 " will appear shown in figure 5-24: 

 

Figure 5-24    Add or Modify an IP Address Filtering Entry 

To create or modify an IP Address Filtering entry, please follow these instructions: 

 

- 30 -